-
Out of stockMOUNTING BRACKET FOR STARTECH USB-ETHERNET HUB. This item has been revised to include a bottom cover that includes cable retention clips for the USB hub. Mounting plate for item 100500 to be used with ET5X cradles .
-
Out of stockPROCLIP ANGLE MOUNT - Mack Granite 2012 - 2018 Mack Pinnacle 2012 - 2018
-
Out of stockHino 200/300 Angled Mount - Commercial Mounting Platform with strong steel construction and includes mount. Does not include Device holder.
-
Out of stockWhen attaching a ProClip device holder or Mount to a vehicle dashboard or other surface which lacks sufficient structural integrity to provide a stable mounting platform, we recommend the use of of our Reinforcement Plates for added stability and durability. - Simply drill the properly located AMPS hole pattern in your mounting surface, position the plate on the back side of the mounting surface. - Includes: Four M4 screws (20mm thread length) and lock washers
-
Out of stockPart# 241422 Pivot Mount, Heavy Duty, 75-100mm VESA, AMPS Base Heavy Duty Pivot Mount AMPS, VESA 75/100
-
Out of stockAngled Mount - Commercial Mounting Platform Strong steel construction Provides the perfect mounting platform Easily attach a device holder to the mount Secure fit within easy reach from the driver's seat
-
Out of stockThis is a custom made holder for the COGNEX MX-1000/MX-1502 that keeps your device in an upright position for better viewing. Easily slide your device in/out of the holder. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, or pedestal mounts. - Custom fit to your bare device - Combine with a ProClip vehicle mount to make a full mounting solution
-
Out of stockThis is a custom made holder for the COGNEX MX-1000/MX-1502 that keeps your device in an upright position for better viewing. Easily slide your device in/out of the holder. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, or pedestal mounts. - Custom fit to your bare device - Includes rubber vibration dampers for rough environments
-
Out of stockThis swiveling top support is designed to fit 241438 or 241439 exactly and should only be used in combination with those products. Add Swiveling Top Support to 241438 or 241439. Ideal for high vibration environments like fork lifts. Includes fasteners for attachment
-
Out of stockHARDWIRE POWER SUPPLY 24/12V TO 5V, 2A (IP841 charging box with Molex to Molex Pig Tail and 2 Pin Molex cable to fixed power source with red fuse holder)
-
Standard scanner mount for Zebra 3600 series
-
Out of stockCommercial Mounting Platform with 10 inch Universal Mount. Fits Dodge, Freightliner and Mercedes Sprinter vans and several other vehicles. Designed to attach in a DIN slot in the dash, so an available or open DIN slot is needed. Notice: Includes 10 inch Mount. Separate screws may be needed to mount a device holder. Strong enough to hold a device in the Tough Sleeve. Recommended for devices that are 4 lbs. or less.
-
Out of stockFront Facing Top Support Cradle with Vibration Damper Custom Fit For: Zebra MC3300 - Does NOT fit the Turret/Rotating Top - Custom fit: Only for the bare device - Includes vibration damper: minimizes vibrations for rough use - Top support: Keeps device securely in place
-
Out of stockThis Vibration Damper effectively reduces the shock and vibration transferred to your mobile computing device mounted in particularly demanding environments such as on heavy machinery or forklifts. Simply install the damper (using the included hardeware) between your mobile device holder/cradle and the mounting bracket or Arm that is attached directly to the vehicle or machinery. The machine screws will engage securely with the M4 threaded steel core within the rubber grommets. - Reduce vibration in your mounted device - Supports standard AMPS hole pattern - High density rubber grommets - Maximum supported weight: 1.5 kg (3.31 lbs)
-
Zebra DS3600 Scanner Mount with Vibration Damper. This is a high quality custom made cradle with a neat and discreet design. Easily slide your device in & out of the cradle. No more fumbling around for your device. The industry standard AMPS hole pattern allows easy attachment to any flat surface or ProClip mount. The preinstalled vibration damper softens vibrations caused by machinery or rough terrain.
-
Out of stockTop Support Hard-Wired Charging Cradle for Pistol Grip Custom Fit For: Zebra TC70 and TC75. Custom fit to your bare device with pistol grip - Rotating top support for rugged use environments - Includes vibration damper to minimize vibrations during rough use - Hard-wire to 12 ~ 24 V vehicle power sources - Provides 10 Watts (2A) charging power
-
Out of stockZebra MC9200 Standard Cradle with Vibration Damper custom fit for a bare device. It keeps your device in an upright position for better viewing and reception. Easily slide your device in/out of the cradle. Provides for safer driving when viewing, accessing and operating your device in your vehicle. The cradle comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, pedestal mounts or handlebar mounts.
-
Out of stockZebra MC9200 Standard Cradle custom fit for a bare device. It keeps your device in an upright position for better viewing and reception. Easily slide your device in/out of the holder. Provides for safer driving when viewing, accessing and operating your device in your vehicle. The cradle comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, pedestal mounts or handlebar mounts.
-
Out of stockThe Tough Sleeve rugged tablet case encapsulates your tablet while charging the device through the Quick Release Power Dock. Industry standard AMPS hole pattern. This Tough Sleeve is equipped with a USB-A plug at the end of the power cord for connection to a USB port. Passes 6 ft Drop-Test to Concrete. Made to Fit: Samsung Galaxy Tab Active 2. Rotation Between Portrait and Landscape View. Angle up to 15 Degrees in any Direction. Key Lock - Two keys are included. Charging Cord with USB Plug
-
Out of stockZebra MC3200 Standard Charging Cradle with Top Support for Hard-Wired Install. - Custom fit: Only for the bare device - Includes vibration damper: minimizes vibrations for rough use. - Fits the MC3200 with or without Pistol Grip. - Does NOT fit the device with Rotating Head.
-
Out of stockPROCLIP CENTER MOUNT - Chevrolet Silverado 2500/3500 Series 2014 - 2018
-
Out of stockPROCLIP CENTER MOUNT - GMC Sierra 2500/3500 Series 2015 - 2018
-
Out of stockPANASONIC FZ-N1 HOLDER WITH SWIVELING TOP SUPPORT - Custom fit to your bare device - Fits device with standard or extended battery - Fits device with or without handstrap - Rotate between portrait and landscape view - Top support arm keeps device in place even during heavy use
-
Out of stockThis is a custom made cradle that keeps your Zebra MC3200 device in an upright position for better viewing and reception. The cradle comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, pedestal mounts or handlebar mounts. - Custom fit: Only for the bare device - Includes vibration damper: minimizes vibrations for rough use - Top support: Keeps device securely in place
-
Out of stockProClip Cigarette Lighter Charger 6 Pin Molex Connector 12/24V to 5.4V 2.7A
-
Out of stockVehicle Cradle with Top Support and Hard-Wired Power Supply. Fits the MC3300R RFID. Custom fit to bare device. Accommodates standard and gun models. Top support keeps the device in place during intense vibrations. AMPS hole pattern for attachment to any mount
-
Out of stockVehicle Cradle with Top Support, Vibration Dampers and Hard-Wired Power Supply. Custom Fit For: Zebra MC3300R RFID. Custom fit to bare device. Vibration Dampers reduce wear and tear on the device. Top support keeps the device in place during intense vibrations. AMPS hole pattern for attachment to any mount
-
Out of stockThis ZEBRA MC3300R cradle with top support provides a convenient location for your device while charging it. This design accommodates the standard model as well as the gun format and the turret/rotating top model. Features: - Custom fit to bare device - Top support keeps the device in place during intense vibrations - AMPS hole pattern for attachment to any mount
-
Out of stockThis ZEBRA MC3300R vehicle cradle provides a convenient location for your device while charging it. This design accommodates the standard model as well as the gun format and the turret/rotating top model. Features: - Custom fit to bare device - Vibration Dampers reduce wear and tear on the device - Top support keeps the device in place during intense vibrations - AMPS hole pattern for attachment to any mount - Top support keeps the device
-
Out of stockKEY LOCK TOUGH SLEEVE WITH USB CABLE SAMSUNG GALAXY TAB A 8.0 (2019 SM-T290 / SM-T295)
-
Out of stockCHARGING HOLDER WITH TILT SWIVEL. NO POWER SUPPLY Zebra TC51 TC52 TC56 TC57
-
Out of stockCHARGING HOLDER WITH TILT SWIVEL,IN-LINE FUSE FOR HARD WIRE INSTALLATION Zebra TC51 TC52 TC56 TC57
-
Out of stockTOUGH SLEEVE ONLY (WITHOUT QUICK RELEASE POWER DOCK OR POWER SUPPLY) SAMSUNG GALAXY TAB A 8.4 (2020 SM-T307)
-
TOUGH SLEEVE, QUICK RELEASE POWER DOCK AND USB CIGARETTE LIGHTER ADAPTER SAMSUNG GALAXY TAB A 8.4 (2020 SM-T307)
-
TOUGH SLEEVE, QUICK RELEASE POWER DOCK , KEY LOCK AND USB CIGARETTE LIGHTER ADAPTER SAMSUNG GALAXY TAB A 8.4(2020 SM-T307)
-
Out of stockTOUGH SLEEVE, QUICK RELEASE POWER DOCK AND HARD-WIRED POWER SUPPLY SAMSUNG GALAXY TAB A 8.4 (2020 SM-T307)
