-
Out of stockCHARGING HOLDER WITH TILT SWIVEL, MOLEX PIG TAIL CABLE AND CIGARETTE LIGHTER PLUG - Zebra TC51 TC52 TC56 TC57
-
Out of stockVehicle Cradle for Protective Boot with Cigarette Lighter Adapter - Custom Fit For: Zebra TC20 and TC25 in Protective Boot (SG-TC2X-BOOT-01) - Custom fit to your device in the protective boot - Includes tilt-swivel to angle cradle 15 degrees any direction - Allows for rotation and adjusting the viewing angle anywhere between portrait or landscape view
-
Out of stockCharging Holder with Tilt-Swivel and Cigarette Lighter Adapter for Janam XT3
-
Out of stockCharging Holder with Tilt-Swivel, USB Host Port and Cigarette Lighter Adapter Samsung Galaxy Tab Active3/2
-
Out of stockProclip Panasonic FZ-T1 /holder with Hard-Wire
-
Out of stockVehicle Cradle - Tilt Swivel and Hard-Wired Power Supply Custom fit to bare device Includes tilt-swivel to allow holder to angle 15 degrees in any direction Tilt-swivel also allows for portrait and landscape view AMPS hole pattern for attachment to any mount
-
Out of stockCharging Holder with Tilt-Swivel and Hard-Wired Power Supply Samsung Galaxy Tab Active3/2
-
Out of stockCharging Holder with Tilt-Swivel, Key Lock and Cigarette Lighter Adapter Samsung Galaxy Tab Active3/2
-
Out of stockCHARGING HOLDER WITH TILT SWIVEL AND USB CIGARETTE LIGHTER PLUG Apple iPad mini 4 / iPad mini (5th Gen 2019)
-
This 4 inch 90 degree twist Mount has teeth within the interlocking joints providing a very strong connection that can withstand a lot of weight. - The mounts come in 2 inch, 4 inch, 6 inch, 8 inch, and 10 inch heights with and AMPS base and top. Mounts can be purchased in complete sets or as individual pieces. - Smaller teeth than our super-duty mounts for more adjustment options - 90 degree twist for more angling options
-
This aluminum 8 inch Mount has teeth within the interlocking joints providing a very strong connection that can withstand a lot of weight. It provides a mounting platform that can be used on a variety of vehicles and fixed locations and can be used to - mount a wide variety of products such as tablets, mobile computers, printers, and mobile phones. - The mounts come in 2 inch, 4 inch, 6 inch, 8 inch, and 10 inch heights with and Round AMPS base and top.
-
Out of stockCharging Cradle, 6-Pin Molex Pigtail No Power Supply (12V) Zebra ET40/ET45 8" (Bare Tablet)
-
Out of stockThis is a custom made holder for the COGNEX MX-1000/MX-1502 that keeps your device in an upright position for better viewing. Easily slide your device in/out of the holder. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, or pedestal mounts. - Custom fit to your bare device - Includes rubber vibration dampers for rough environments
-
Out of stockCharging Cradle with Tilt-Swivel, USB Cable and Top Hold (Does not include power supply) Zebra TC51 TC52 TC56 TC57 with Rugged Boot
-
Out of stockCharging Cradle for Hard-Wired Installation. Custom Fit For: Zebra MC55 / MC65 / MC67 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
-
Out of stockThis charging cradle is a cradle style mount custom made for a perfect fit for the MC40 with integrated magnetic stripe reader. It has a dock connector for easy connection of the device to the cradle and a power cord for hard-wiring to a permanent power source in the vehicle.
-
Out of stockThis charging cradle is custom made for a perfect fit with your device. It has a dock connector for easy connection of the device to the cradle and a power cord for hard-wiring to a permanent power source in the vehicle.
-
Out of stockThis charging cradle is custom made for a perfect fit for the MC40 without integrated magnetic stripe reader. It has a dock connector for easy connection of the device to the cradle and a power cord for hard-wiring to a permanent power source in the vehicle.
-
Out of stockVehicle Charging Cradle for Hard-Wired Installation. Custom Fit For: Zebra TC55 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
-
Out of stockVehicle Charging Cradle for Hard-Wired Installation. (For device with TC55 Boot.) Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view. Charging cable permanently attached to holder - Cord length with black box is 96 inch / 243 cm - Black power conversion box is 3 inch / 7.6 cm - Provides 10 Watts (2A) charging power - Hard-wire to 12 / 24 V vehicle power sources - Black box converts from 12 / 24 V to 5 V output - LED illuminated power indicator
-
Charging Cradle for Hard-Wired Installation. Custom Fit For: Zebra TC70 and TC75 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
-
Out of stockCharging Holder for Hard-Wired Installation. Custom Fit For: CipherLab CP60. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view
-
Charging cradle for Hard-Wired Installation (for Device with Zebra Rugged Boot). Custom Fit For: Zebra TC51/52/56/57 - Custom fit to device with rugged boot - Includes Tilt-Swivel to allow cradle to angle 15 degrees in any direction - Tilt-swivel also allows for portrait and landscape view - AMPS hole pattern for attachment to any mount
-
Out of stockCharging Holder for Hard-wired Installation (for Device without Zebra Rugged Boot) Custom Fit For: Zebra TC51/52/56/57 Custom fit to bare device Includes Tilt-Swivel to allow holder to angle 15 degrees in any direction Tilt-swivel also allows for portrait and landscape view AMPS hole pattern for attachment to any mount
-
Out of stockPANASONIC Key Lock Standard Holder Custom Fit For: Panasonic FZ-B2 & FZ-M1 without a case. Easily slide device in and out of holder - Includes Tilt-Swivel to angle holder 15 degrees any direction - Rotate between portrait and landscape view.
-
Out of stockThis universal adjustable ProClip Tablet holder is designed to fit most 7-10 inch tablets without a case. The holder is designed with the intention to leave as much space open to be able to access the charging port and buttons on your tablet. Once the holder is adjusted for the right size it will allow you to easily insert and remove the device with our spring action corner. With this tablet holder you can use your tablet in landscape or portrait view, and easily rotate between the two positions. You can also angle/tilt the tablet 15 degrees for better viewing and to avoid glare.
-
Out of stockCharging Cradle with Straight Cord Cigarette Lighter Plug (For device with TC55 Boot). - Power Specs: - USB cable with 12 V power plug included - Cord length is 39 inch / 99 cm - Works in any 12 V vehicle power outlet - Provides up to 10 Watts (2.1A) charging power - Power plug converts from 12 V to 5 V output - LED illuminated power indicator
-
Top Support Charging Cradle with Straight Cord Cigarette Lighter Plug - Custom Fit For: Zebra TC70 / TC72 / TC75 / TC77 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Custom Fit For: Zebra TC70 / TC72 / TC75 / TC77 - Item: 560753 - Custom fit to your bare device - Includes Tilt-Swivel to angle holder 15 degrees any direction - Rotate between portrait and landscape view
-
Out of stockNon-Charging Cradle Zebra ET40/ET45 8" (with Rugged Boot) Supports Expansion Back
-
For installation into vehicle power supply - Works with forklifts and other vehicles that use up to 48 volt direct current (VDC) power systems - Input Voltage Tolerance of up to 60 VDC - Converts 60V, 48V, 36V, 24V, and 18V systems to 12V - 36W continuous output. Go to our website at https://www.proclipusa.com/product/48v-to-12v-power-converter?sSearch=71 0872 for complete specifications
-
Out of stockCHARGING HOLDER WITH TILT-SWIVEL AND CIGARETTE LIGHTER ADAPTER FOR ZEBRA TC26
-
Out of stockCharging Cradle with Tilt-Swivel and 5.4V Cigarette Lighter Adapter for Device with Rugged Boot Zebra TC53 TC58
-
Out of stockNon-Charging Cradle with Tilt-Swivel for Bare Device (without Rugged Boot) Zebra TC53 TC58
-
Out of stockCharging Cradle for Hard-Wired Installation - Custom Fit For: Zebra MC3200 - Custom fit to your device - Includes tilt-swivel to allow cradle to angle 15 degrees in any direction - Tilt-swivel also allows for portrait and landscape view - AMPS hole pattern for attachment to any mount - Fits the MC3200 with or without Rotating Head. - Does NOT fit device with Pistol Grip.
-
Out of stockCharging Holder for Hard-Wired Installation. Custom Fit For: Zebra MC3200. Custom fit to your device. Includes tilt-swivel to allow holder to angle 15 degrees in any direction. Tilt-swivel also allows for portrait and landscape view. AMPS hole pattern for attachment to any mount. Fits the MC3200 with or without Rotating Head. Does NOT fit device with Pistol Grip.
-
Out of stockCharging Cradle for Hard-Wired Installation and Device with PowerPack - Custom Fit For: Zebra TC20 and TC25 - Custom fit to your device with PowerPack - Includes tilt-swivel to allow cradle to angle 15 degrees in any direction - Tilt-swivel also allows for portrait and landscape view - AMPS hole pattern for attachment to any mount
