-
Out of stockPROCLIP CENTER MOUNT Extra strength mounting platform. - Ford Excursion 2008 - 2016 Ford F-250/350/450/550/Super Duty 2008 - 2016 Ford F-650/750 2008 - 20xx
-
Out of stockPROCLIP ANGLE MOUNT Extra strength mounting platform. - Ford Excursion 2008 - 2016 Ford F-250/350/450/550/Super Duty 2008 - 2016 Ford F-650/750 2008 - 20xx
-
Out of stockJeep Wrangler (JK) Center Dash Mount - Extra-Strength. Visually inspect your interior for a match to our photos. Jeep offered two dash styles for this vehicle in 2018, the JK and JL. This ProClip only fits the JK models shown in our photos. Fits models with radio style shown in photo.
-
Out of stockPROCLIP CENTER MOUNT - Freightliner Business Class M2 2003 - 20xx Jayco Seneca 2003 - 20xx
-
Out of stockPROCLIP CENTER MOUNT - International 4000/7000/8000-series/TerraStar/WorkStar 2002 - 2017 International DuraStar/TranSstar 2002 - 2018
-
Out of stock2013 - 20xx Kenworth T880 2013 - 20xx Kenworth W990 2018 - 20xx
-
Out of stockPROCLIP CENTER MOUNT - Ford Transit 2014 - 2019
-
Out of stockPROCLIP CENTER MOUNT - Ford E-Series 2009 - 20xx. This ProClip Vehicle Center Mount is a custom made car specific mount. The mount attaches to the center area of the car dashboard. The ProClip Center Mount is a very sturdy mounting bracket that clips tightly into the seams of the dashboard. No drilling holes or dismantling of the dashboard is required, simply clip on in seconds.
-
Out of stockCENTER DASH MOUNT - RAM 2013 - 2018. This mount attaches in the storage tray above the center screen. Combine with a ProClip device holder to make a custom mounting solution for your phone or GPS. The ProClip Center Mount Extra Strength for Dodge RAM 1500, 2500, 3500, 4500 and 5500 pickup models, screws securely into existing fixtures; no drilling or modifying needed. No drilling holes or dismantling of the dashboard is required. NOT for tablets! This mount is only approved for use with phone holders.
-
Hino 200/300 Angled Mount - Commercial Mounting Platform, strong enough to hold a device in the Tough Sleeve.The mount attaches to the upper center right of the center dash. Device Holder NOT included, sold separately.Comes with a pre-drilled hole pattern for device attachment. A device holder can easily be attached anywhere on the face plate. Compatibel with: Hino 200-Series 2005 - 2020, Hino 300-Series 2005 - 2020
-
Out of stockHino 155/195 Center Dash Mount - Extra-Strength. 2017 - 2020. Clips into the seams of the dashboard. Easily attach a device holder to the mount. Secure fit within easy reach from the driver's seat. No holes or damage to your dashboard."
-
Out of stockPROCLIP ANGLE MOUNT, Extra strength mounting platform. - Freightliner Cascadia 2018 - 2020 - Mount ONLY. For optimal viewing, include ProClip # 202016 (Standard-Duty 5 Inch Mount). 4 - 4mm x 12mm machine screws will be needed to attach a device holder or pedestal to the mount. - Strong enough to hold a device in the Tough Sleeve.
-
Out of stockPROCLIP CENTER MOUNT, Extra strength mounting platform. - Volvo VNL/VNR 2018 - 20xx
-
Out of stockPROCLIP CENTER MOUNT, Extra strength mounting platform. - Dodge / Ram Trucks 2009 - 2018
-
Out of stockRAM Center Dash Mount - Extra-Strength with Mount - NOT for Classic models or models with the large 12 inch display screen. For the Classic models, see our 2018 listings. - - This item does not come with fasteners for attaching a device holder.
-
Out of stockPROCLIP CENTER MOUNT, Extra strength mounting platform. - Dodge / Ram Trucks 2019 - 20xx
-
Out of stockPROCLIP CENTER MOUNT EXTRA STRENGTH hev Silverado and GMC Sierra 1500 2019 - 20xx Chevrolet Silverado and GMC Sierra 2500-3500 2020 - 20xx
-
Out of stockAngled Dash Mount for Freightliner Cascadia 2018-2020. Clips into the seams of the dashboard. Easily attach a device holder to the mount. Secure fit within easy reach from the driver's seat. No holes or damage to your dashboard. Strong enough to hold a device in a Tough Sleeve. The mount will come with 2mm pre-drilled holes
-
Out of stockPROCLIP CENTER MOUNT EXTRA STRENGTH - Ford Transit 2020 - 20xx Ford Tourneo Custom 2019 - 20xx
-
Out of stockStandard Left/Right Extension Plate. 100 x 50 x 5 mm (3.94 x 1.97 x 0.20 in). Avoid interference with the dashboard controls/displays when using wide devices. To extend your device to the left or right from the Vehicle Mount (especially the ProClip Angled Mount) to avoid interference with the dashboard controls/displays. Extension plates may not line up with the pre-drilled holes on your ProClip mount. The included self-tapping screws can be used to screw anywhere into the mount face.
-
Out of stockSMALL PEDESTAL MOUNT WITH MULTI ANGLE TILT SWIVEL
-
Out of stockThis Tilt-Swivel is made for use with holders for heavier devices e.g. Tablets, Mobile Computing devices, Bar Code Scanners, Two-way Radios etc. Tilt, swivel and/or extend your holder/device for a better viewing position. It tilts approx. 15 degrees, swivels 360 degrees and extends 1 inch/ 2.54 cm. The Base plate has AMPS hole pattern and the face plate has several hole patterns including AMPS to accommodate most holders, cradles, mounts and car kits.
-
Out of stockThis Pedestal Mount Round Mounting Plate creates an extra sturdy and secure mounting platform that can be used in aircrafts, boats and a variety of vehicles e.g. personal vehicles, commercial vehicles, emergency vehicles, police vehicles, trucks, tractors, fork lifts and RVs. Additionally, the Pedestal Mount Extension Rod can be used with mounts in retail stores, kiosks, gyms, conference rooms, trade shows etc.
-
Out of stockPEDESTAL MOUNT KIT 6 INCH WITH SWIVEL HEAD (Pre-assebled with 4 inch Circular Plate, 6 Inch Pedestal Mount, Swivel Head, Locking Move Clip Heavy Duty Female Plate)
-
Out of stockThis 4 inch aluminum Mount has teeth within the interlocking joints providing a very strong connection. It can be used in a variety of vehicles or fixed locations to mount a wide variety of products such as tablets and mobile computers. - These come in 2, 4, 6, 8 and 10 heights with and AMPS base and top and can be purchased in complete sets or as individual pieces. - The design allows you to mix and match the parts to create your own unique design/solution.
-
Out of stockThis 6 inch aluminum Mount has teeth within the interlocking joints providing a very strong connection. It can be used in a variety of vehicles or fixed locations to mount a wide variety of products such as tablets and mobile computers. - These come in 2, 4, 6, 8 and 10 heights with and AMPS base and top and can be purchased in complete sets or as individual pieces. - The design allows you to mix and match the parts to create your own unique design/solution.
-
Out of stockAdapter Plate for Holders without Tilt-Swivel
-
Out of stockIf you need to attach a device holder or a angled top plate to one of our pedestals this set of screws is a perfect fit. Includes four screws and locking nuts for a secure hold. Extra screw set for aluminum pedestal mounts. Fits round plastic base with threaded inserts. Includes: 4 screws / 4 lock nuts
-
Out of stockSuper-Duty Pedestal Mount with Square Bases - 10" Length
-
Out of stockAngled Top Part - 60 Degrees Angles the top part of the Pedestal Fits both Solid Core and Hollow Core Pedestals Dual AMPS-hole patterns for mounting of a device holder
