-
Out of stockPerfect for use on square posts. Attach a Device holder for your device to the face plate and you are all set to go. Fits bars and square posts that are 45-50mm wide. Very strong construction. Supports heavy devices. Provides a firm installation
-
Out of stockPerfect for use on square posts. Attach a Device holder for your device to the face plate and you are all set to go. Fits bars and square posts that are 34 - 40mm wide. Very strong construction. Supports heavy devices. Provides a firm installation
-
Out of stockThis kit offers an easy and secure way to mount your DS8100-HC cradle. Provides custom fit mount plate for Presentation Cradle. Includes quick release dock for easy removal of the cradle. Pre-drilled holes for AMPS hole patterns
-
Out of stockPrinter Mount Kit with Battery Access for Zebra ZQ630 QLN 420
-
Out of stockHard-Wired Power Supply 12-48V Input 12V 3A Output (IP1339 charging box with 2-PIn Molex Cable IP811 and 6-Pin Molex 12V Output Cable IP1341)
-
Out of stockCigarette Lighter Adapter (Cig Plug) Power Supply 12-24V Input 12V 3A Output 6-PIn Molex Cable
-
Out of stockThis replacement female quick release dock features a Key-Lock and 40mm release lever. 40 mm Extended release tab for easy device removal. Features key lock to secure the docked device. Includes 1 female Quick Release Dock
-
Out of stockThis swiveling top support is designed to fit 241438 or 241439 exactly and should only be used in combination with those products. Add Swiveling Top Support to 241438 or 241439. Ideal for high vibration environments like fork lifts. Includes fasteners for attachment
-
Out of stockThis Small universal ProClip Tablet holder is designed to fit most 7-10 inch tablets without a case. The holder is designed with the intention to leave as much space open to be able to access the charging port and buttons on your tablet. Works with or without case (case can be up to 25mm at its thickest point). Top and bottom arms have padded cushions for added friction to ensure a secure fit. Designed to fit small tablets that are 120 - 150 mm (4.72 - 5.91 inches) in width.
-
Out of stockHOLDER WITH TILT SWIVEL AND SPRING LOCK iPad 9.7 (2018) iPad 9.7 (2017) iPad Air 1 iPad Air 2 iPad Pro 9.7 (2016)
-
Out of stockStandard Holder Custom Fit For: Samsung Galaxy Tab Active 2. Custom fit to tablet with original skin. Includes tilt-swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Only for device with original skin.
-
Out of stockScanner Bracket for Oracle Micros POS - MOQ - 25 Units
-
Out of stockET50 Charging PCBA with USB Port Direct and Tablet Provided 5V Power Fits All Zebra ET50 Charging Cradles
-
Out of stockA pivoting AMPS mounting plate for use with ProClip aluminum mounts. Can be attached to the top of any of our mounts to provide a 180 degree pivot to face either direction. Great for when a device needs to be seen by multiple users. - 180 degree pivoting head for mounting ProClip device holders - AMPS hole pattern on both head and base to allow use with ProClip mounts or any product that uses the AMPS hole pattern - Easily accessible thumb lever allows you to lock pivot in place
-
Out of stockThe Quick Release Power Dock combines a electrical connection with the convenience of quick release. Can be used with any holder that incorporates the Quick Release Power Dock. Includes power harness for hard-wiring into a vehicle. Key lock for added security. Only for sleeves that feature the Quick Release Power Dock. Allows a Tough Sleeve to be moved between multiple locations. Keeps your device charged while also providing easy removal from the mount. 4 screws + nuts and 1 torx key included
-
Out of stockHEAVY DUTY ALUMINUM PIPE MOUNT, AMPS M4 THREADED HOLES, INTEGRATED RUBBER PADS DIAMETER: 3/4 IN. TO 1 1/4 IN. (19-30 MM) HOLE PATTERN: AMPS
-
Out of stockHEAVY DUTY ALUMINUM PIPE MOUNT, AMPS M4 THREADED HOLES, INTEGRATED RUBBER PADS DIAMETER: 1 1/4 IN. TO 1 5/8 IN. (29-42 MM) HOLE PATTERN: AMPS
-
Out of stockCFLD Shifting Plate for Oracle Micros POS Terminal
-
PORTSMITH USB 2.0 TO 10/100 ETHERNET ADAPTER (Includes no cables)
-
Out of stockPORTSMITH VEHICLE CRADLE- ZEBRA TC20/25 W/CARPLUG
-
Out of stockPORTSMITH VEHICLE CRADLE- ZEBRA TC7X+BOOT W/CARPLUG
-
Out of stockQuick Release Dock with Suction Cup Mount 7.5 Inch
-
Out of stockHino 155/195 Center Dash Mount - Extra-Strength. 2017 - 2020. Clips into the seams of the dashboard. Easily attach a device holder to the mount. Secure fit within easy reach from the driver's seat. No holes or damage to your dashboard."
-
Out of stockA pivoting AMPS mounting plate for use with ProClip aluminum pedestal mounts. Can be attached to the top of any of our mounts to provide a 180 degree pivot to face either direction. Great for when a device needs to be seen by multiple users.
-
Standard Duty Forklift Mount, 5 Inch Arm, 3.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 5 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
-
Heavy Duty Swivel, #1 Heavy Duty Pedestal Teeth, #2 Heavy Duty Pedestal Teeth, Does not include base plates.
-
Out of stockThis Medium universal ProClip Tablet holder is designed to fit most 7-10 inch tablets without a case. The holder is designed with the intention to leave as much space open to be able to access the charging port and buttons on your tablet. Works with or without case (case can be up to 25mm at its thickest point). Top and bottom arms have padded cushions for added friction to ensure a secure fit. Designed to fit medium sized tablets that are 140 - 195 mm (5.51 - 7.68 inches) in width.
-
Out of stockHolder with Spring Lock Getac T800 (Fits unit both with and without handstrap. For both standard and SnapBack battery)
-
Out of stockCharing Holder, Tilt Swivel and Dual USB to Cigarette Lighter Adapter for Kyocera DuraForce Pro2
-
Out of stockCharging Holder with USB Cigarette Plug for Samsung Xcover Pro SM-G715
