-
Out of stockAC Power Supply, 5 Cable, 100-240V, 1.3A Input, 12V, 3.0A Output, Int l Adapters Included
-
Out of stockDC Step Down Converter with 6 ft. Barrel Jack Cable Input 48V Nominal: (33.6V to 60V Input Voltage) Output: 12V 3 Amps Continuous (Alfatronix P/N: DDi48-12 036-B) Cable Barrel Jack is 5.5mm OD
-
Out of stockHardwire Power Supply with Dual USB Ports and 2-Pin Molex Cable Input 12/24V to 2 Pin Molex Port. Output Port 1: 5.25 V, 2.4 A, Output Port 2: Qualcomm quick charge 6V/3A 9V/2A, 12V 1.5A
-
Out of stock6 Pin Molex to USB A Cable (300 cm / 9 feet long)
-
Out of stock10 Inch Extension for Universal Pedestals
-
Out of stockUSB-C/A Wall Charger 18W USB-C Port Featuring Power Delivery 3.0 12W USB-A for Charging
-
Out of stockUSB Strain Relief Clamp Piece for Bottom Cover for ET5X Charging Cradles
-
Out of stockThis 4.5 inch Pedestal Mount is very strong yet light weight. The pedestal top swivels 340 degrees. It has a 6 hole base for attaching to any flat surface or one of our Round Mounting Plates for additional strength. Head is angled 90 degrees for easy device viewing
-
Out of stockThis 4.5 inch Pedestal Mount is very strong yet light weight. The pedestal top swivels 340 degrees. It has a 6 hole base for attaching to any flat surface or one of our Round Mounting Plates for additional strength. Head is angled 75 degrees for easy device viewing
-
Out of stockThis 4.5 inch Pedestal Mount is very strong yet light weight. The pedestal top swivels 340 degrees. It has a 6 hole base for attaching to any flat surface or one of our Round Mounting Plates for additional strength. Head is angled 60 degrees for easy device viewing
-
Out of stockThis 4.5 inch Pedestal Mount is very strong yet light weight. The pedestal top swivels 340 degrees. It has a 6 hole base for attaching to any flat surface or one of our Round Mounting Plates for additional strength. Head is angled 45 degrees for easy device viewing
-
Out of stockThis 4.5 inch Pedestal Mount is very strong yet light weight. The pedestal top swivels 340 degrees. It has a 6 hole base for attaching to any flat surface or one of our Round Mounting Plates for additional strength. Head is angled 30 degrees for easy device viewing
-
Out of stockThis 4.5 inch Pedestal Mount is very strong yet light weight. The pedestal top swivels 340 degrees. It has a 6 hole base for attaching to any flat surface or one of our Round Mounting Plates for additional strength. Head is angled 15 degrees for easy device viewing
-
Out of stockThis 6.5 inch Pedestal Mount is very strong yet light weight. It is designed for a discreet cable entry, where the cable is passed through the Pedestal Mount. The pedestal top swivels 340 degrees. You can easily combined the Pedestal Mount with an angled top part. It has a 6 hole base for attaching to any flat surface or one of our Round Mounting Plates for additional strength.
-
Out of stock45 degree Angled Top part to mount a device holder onto. Fits all ProClip pedestals. The top has four holes for mounting onto the top part of a Pedestal Mount. It has dual AMPS-holes for mounting of holder for unit.
-
Out of stockThis 4 inch Pedestal Mount Kit creates an extra sturdy and secure mounting platform that can be used in a variety of vehicles and fixed locations like retail stores, kiosks, gyms, conference rooms, trade shows etc. The Pedestal Mount Kit come in 4 inches high with 100mm round base and AMPS top. The design allows you to mix and match the parts, or combine complete sets with loose parts to create your own unique design/solution. The base and the rods can be angled in steps of 24 degrees.
-
Out of stockPerfect for installing any equipment that needs to be turned for use from different directions to be seen by multiple users. Swivels 340 degrees. AMPS hole pattern to attach any ProClip device holder onto.
-
Out of stockCHARGING HOLDER WITH TILT SWIVEL AND USB ON-THE-GO CABLE. FOR HARD WIRE INSTALLATION Zebra TC51 TC52 TC56 TC57
-
Out of stockLG G Pad F2 8.0 Standard Holder: Custom fit to your bare device Includes tilt-swivel to angle holder 15 degrees any direction Rotate between portrait and landscape view
-
Out of stockStandard Holder (for Device without Zebra Rugged Boot) Custom Fit For: Zebra TC51/52/56/57
-
Out of stockProClip Small Universal Tablet Holder for use with a case Item: 511625 Fits most 7 - 10 inch tablets with a protective case like the OtterBox Easily slide device in and out of holder with spring action corner Includes Tilt-Swivel to angle holder 15 degrees any direction Width adjustment 185 - 245 mm (7.25 - 9.6 in) Height adjustment 108 - 173 mm (4.25 - 6.8 in)
-
Out of stockPRINTER MOUNT PLATE - Zebra QLN 220/320 : ZQ610/620.This printer mount offers an easy and secure way to mount your Zebra printer. The printer mount plate allows for mounting to any APS compatible mount easy mounting to any flat surface while raising the printer for ease of use. Plate COMES WITH PKG OF (2) MOUNTING SCREWS #SK651. Pre-drilled holes for AMPS hole pattern for direct attachment to a mount. - Brass inserts for threaded mounting to an AMPS compatible mount.
-
Out of stockMEDIUM ADJUSTABLE HOLDER WITH Tilt-Swivel UM-1 Inner Groove width: 6 mm (0.24 inches) Width adjustment: 62 - 77 mm (2.44 - 3.03 inches)
-
Out of stockBLACK TOUGH SLEEVE WITH KEY LOCK ON SIDE AND ROOM FOR USB TO ETHERNET ADAPTER Zebra ET50/55 10.1 inch
-
Out of stockPROCLIP ANGLE MOUNT - Peterbilt Model 579 2012 - 20xx
-
Out of stockZebra ZD410 Printer Mount with Speed Clip (Black ABS). This printer mount offers an easy and secure way to mount your ZD410 printer. The quick release speed clip combines the convenience of mounting with the ease of quick release for maximum functionality. Includes quick release Speed Clip for easy removal from mounting surface. Pre-drilled holes for AMPS hole patterns
-
Out of stockPROCLIP ANGLE MOUNT - Kenworth T370 2002 - 20xx
-
Out of stockIf your printer is mounted to a wall or a mobile cart you might not have a place to securely keep the power supply. This item offers an easy way to mount the power supply of your printer. Keeping it secure and out of the way; so you do not have to worry about it. Can be mounted to any flat surface.Provides the perfect mounting platform. Pre-drilled holes for easy mounting
-
Out of stockDesktop Charging Cradle for Sonim XP8 (Does not include power supply)
-
Adjustable Tablet Holder - 7 to 10 Inch Item: 241600 Fits most 7 - 10 inch tablets with a case (up to 15 mm thick) Easily slide device in and out of holder with spring action corner Width adjustment 7.25 - 10.2 in (185 - 260 mm) Height adjustment 4.25 - 7.2 in (108 - 185 mm)
-
Out of stockMETAL MOUNT - PROCLIP CENTER MOUNT - Ford Excursion 2008 - 2016 Ford F-250/350/450/550/Super Duty 2008 - 2016 Ford F-650/750 2008 - 20xx
-
Out of stockMOUNT PLATE FOR ZQ520 PRINTER,ABS W/ 3X AMPS
-
Out of stockTOP SUPPORT HOLDER Zebra TC75 with Pistol Grip
-
Out of stockPrinter Mount Kit with Quick Release Dock for Zebra ZQ520
