-
Out of stockStandard Battery Kit for XT2 (includes 3000mAh 3.8V battery and NFC enabled cover)
-
Out of stockiPad Key Lock Holder - Custom Fit For: iPad 10.2 (2019) - Custom fit to tablet - Includes Tilt-Swivel to angle holder 15 degrees any direction - Rotate between portrait and landscape view
-
Out of stockHolder with Key Lock for Panasonic FZ-L1
-
Out of stockHOLDER WITH TILT SWIVEL AND KEY LOCK Samsung Galaxy Tab Active3 Active2
-
Out of stockCharging Holder, Tilt-Swivel, Magnetic Cable and Cigarette Lighter Adapter for Samsung Xcover Pro SM-G715
-
Out of stockNon-Charging Cradle Zebra ET40/ET45 8" (with Rugged Boot)
-
Out of stockNon-Charging Cradle Zebra ET40/ET45 8" (Bare Tablet)
-
Out of stockThis Holder is made to fit the iPad Air 2 tablet with OtterBox Defender case and includes Key Lock.
-
Out of stockLarge Adjustable Charging Holder T3. Adjustable fit for your device with case. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Device thickness: 12-16 mm (0.47-0.62 inches). Width adjustment: 75-89 mm (2.95-3.50 inches). Reversible USB cable with 12 V power plug included. Works in any 12 V vehicle power outlet. Provides up to 10 Watts (2.1A) charging power. Power plug converts from 12 V to 5 V output. LED illuminated power indicator
-
Out of stockThis Large universal ProClip Tablet holder is designed to fit most 7-10 inch tablets without a case. The holder is designed with the intention to leave as much space open to be able to access the charging port and buttons on your tablet. Works with or without case (case can be up to 25mm at its thickest point). Top and bottom arms have padded cushions for added friction to ensure a secure fit. Designed to fit large tablets that are 180 - 230 mm (7.09 - 9.06 inches) in width.
-
Out of stockCradle with Tilt-Swivel. Custom Fit For: Zebra MC9500 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
-
Out of stockZebra MC9200 Standard Cradle custom fit for a bare device. It keeps your device in an upright position for better viewing and reception. Easily slide your device in/out of the holder. Provides for safer driving when viewing, accessing and operating your device in your vehicle. The cradle comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, pedestal mounts or handlebar mounts.
-
Zebra DS3600 Scanner Mount with Vibration Damper. This is a high quality custom made cradle with a neat and discreet design. Easily slide your device in & out of the cradle. No more fumbling around for your device. The industry standard AMPS hole pattern allows easy attachment to any flat surface or ProClip mount. The preinstalled vibration damper softens vibrations caused by machinery or rough terrain.
-
Out of stockThis is a custom made holder for the COGNEX MX-1000/MX-1502 that keeps your device in an upright position for better viewing. Easily slide your device in/out of the holder. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, or pedestal mounts. - Custom fit to your bare device - Combine with a ProClip vehicle mount to make a full mounting solution
-
Out of stockHino 200/300 Angled Mount - Commercial Mounting Platform with strong steel construction and includes mount. Does not include Device holder.
-
Out of stockMOUNTING BRACKET FOR STARTECH USB-ETHERNET HUB. This item has been revised to include a bottom cover that includes cable retention clips for the USB hub. Mounting plate for item 100500 to be used with ET5X cradles .
-
Out of stockPrinter Mount Kit Direct Thermal and Thermal Transfer Models Zebra ZD420 ZD421 ZD620 ZD621
-
Out of stockPrinter Mount Kit for Battery Access Includes Quick Release Dock TSC Alpha 30L / 40L
-
Out of stockHeavy-Duty Clamp Mount, AMPS, No Arm, 5 x 5.125 Inch Clamp
-
Standard Duty Forklift Mount, 6 Inch Arm, 3.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 6 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
-
Standard Duty Forklift Mount, 6 Inch Arm, 2.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 6 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
-
Out of stockStandard Duty Forklift Mount, 5 Inch Arm, 2.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 5 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
-
Out of stockThis aluminum 2 inch Mount has teeth within the interlocking joints providing a very strong connection that can withstand a lot of weight. It provides a mounting platform that can be used on a variety of vehicles and fixed locations and can be used to - mount a wide variety of products such as tablets, mobile computers, printers, and mobile phones. - The mounts come in 2 inch, 4 inch, 6 inch, 8 inch, and 10 inch heights with and AMPS base and top.
-
Out of stockThis 2 inch Mount has teeth within the interlocking joints providing a very strong connection. It is made of aluminum and can be used in a variety of vehicles and locations like retail stores, kiosks and gyms. - The mounts come in 2, 4, 6, 8, and 10 inch heights with and AMPS base and top. Mounts can be purchased in complete sets or as individual pieces. The design allows you to mix and match the parts, or combine complete sets with loose parts to create your own unique solution.
-
Out of stockZebra QLN220/320 : ZQ610/620 CHARGE MOUNT KIT - Includes Quick Release Power Dock. Quick Release Power Dock allows charging of the printer and quick release from mounting location. Pre-drilled holes for AMPS hole patterns
-
Perfect for use with all types of forklifts. Attach a custom ProClip device holder directly to the face plate or add a ProClip Mount for even more flexibility. - Works perfectly on the roll bar of a forklift - The forklift mount can be mounted on square surfaces - Multiple sets of AMPS holes makes the fitting of a ProClip mount base easy - Comes with complete set of screws in various sizes, allowing for the forklift mount to span from 130mm to 5mm
-
Out of stockPerfect for installing any equipment that needs to be turned for use from different directions to be seen by multiple users. Swivels 340 degrees. AMPS hole pattern to attach any ProClip device holder onto.
-
Sale!Out of stockPolyester Z-Ult 2000T 1.5x0.37 5 3in core 1 Roll
-
Sale!Out of stockLABEL 2 x 4, 1-ID 4-OD PERF OUT 450/RL 8RL/CTN 3600/CTN SATO-Direct 200CT
-
Sale!Out of stockLABEL 4 x 4, 3-ID 8-OD PERF OUT 1410/RL 4RL/CTN 5640/CTN SATO-Transfer 200P
-
Sale!Out of stockZULT 2000T WHITE 1 X 0.25 16,4 56 LBLS/RLSINGLE ROLL
-
Sale!Out of stockLabel, Paper, 3x1in (76.2x25.4mm); TT, Z-Select 4000T, High Performance Coated, Permanent Adhesive, 1in (25.4mm) core, 2580/roll, 6/box, Plain
