-
Out of stockCharging Holder with Wall Adapter - Samsung Galaxy Tab Active Pro
-
Out of stockCharging Holder Only with Tilt-Swivel, Key Lock and USB Host Port Samsung Galaxy Tab Active3 Samsung Galaxy Tab Active2
-
Out of stockCharging Holder Only with Tilt-Swivel, Key Lock Samsung Galaxy Tab Active3 Samsung Galaxy Tab Active2
-
Heavy Duty Swivel, #1 Heavy Duty Pedestal Teeth, #2 Heavy Duty Pedestal Teeth, Does not include base plates.
-
Out of stockHeavy Duty Swivel Mount - Round Bases, #1 Heavy Duty Pedestal Teeth, #2 Heavy Duty Pedestal Teeth, 5MM Slots (Fits M5 Fasteners)
-
Heavy Duty Swivel Mount - Round Bases, #1 Heavy Duty Pedestal Teeth, #2 Heavy Duty Pedestal Teeth, 4MM Slots (Fits M4 Fasteners)
-
Out of stockPrinter Mount with Media Roller and Quick Release Power Dock Zebra ZQ630 QLN 420
-
Out of stockDesktop Charging Dock Zebra TC21 TC26
-
Out of stockHolder for Zebra TC51/52/56/57 in Rugged Boot with Trigger Handle
-
4 Slot Desktop Charging Dock Samsung Xcover Pro SM-G715
-
Out of stockHolder with Spring Lock and Rear Camera Access for Zebra L10 Xslate or Xpad
-
Out of stockHardwire Power Supply with Dual USB Ports and 2-Pin Molex Cable Input 12/24V to 2 Pin Molex Port. Output Port 1: 5.25 V, 2.4 A, Output Port 2: Qualcomm quick charge 6V/3A 9V/2A, 12V 1.5A
-
Out of stockQuick Release Power Dock (Quick Charge), Tilt-Swivel and USB Cable
-
HEAVY DUTY ALUMINUM PIPE MOUNT, AMPS M4 THREADED HOLES AND WORM GEAR CLAMPS DIAMETER: 1 IN. TO 5 IN. (25-130 MM) HOLE PATTERN: AMPS
-
Out of stockHEAVY DUTY ALUMINUM PIPE MOUNT, AMPS M4 THREADED HOLES, INTEGRATED RUBBER PADS DIAMETER: 1 1/4 IN. TO 1 5/8 IN. (29-42 MM) HOLE PATTERN: AMPS
-
Out of stockPrinter Mount Kit with Battery Access for Zebra ZQ630 QLN 420
-
Out of stockVehicle Cradle with Key Lock for Zebra ET51 8.4" with Integrated Barcode Scanner
-
Vehicle Cradle for Zebra ET51 8.4" with Integrated Barcode Scanner
-
Out of stockHEAVY DUTY ALUMINUM PIPE MOUNT, AMPS M4 THREADED HOLES, INTEGRATED RUBBER PADS DIAMETER: 3/4 IN. TO 1 1/4 IN. (19-30 MM) HOLE PATTERN: AMPS
-
Out of stockHeavy-Duty Forklift Mount, 6 Inch Arm, 5 x 5.125 Inch Clamp 90 DEGREE OFFSET 6 INCH PEDESTAL MOUNT HD (Rnd Base Large Teeth, Rnd Base Small Teeth, Wing Nuts)
-
Custom Fit For: Zebra MC9300 - Custom fit to your bare device - One-handed operation - Swiveling Top Support - Vibration Dampers reduce device wear - Keeps screen facing the operator - Fits device with or without hand strap - AMPS hole pattern for attachment to any mount - Forklift installs recommended with - Forklift Mount #215980 - Flat surface installs recommended with - Universal Pedestal #202010
-
XL Table Stand Holds devices up to 10.1" tablets Allows for use in portrait or landscape view May be permanently attached to a tabletop (extra hardware required)
-
Out of stockHeavy-Duty Clamp Mount, AMPS, No Arm, 5 x 5.125 Inch Clamp
-
This tablet cradle is designed to fit the Zebra L10 tablet in both the XSLate and XPad format. The key lock will slide through the handle of the Xpad version or over the top of the XSlate and provide a secure hold for the device. - This cradle doesn't block the rear facing camera. - The cradle is designed to fit the Zebra xDIM V3 module to add power and USB ports as needed for external accessories such as RFID readers or bar code scanners. - Includes AMPS and VESA 75 mounting hole patterns.
-
Vehicle Cradle with Top Support, Vibration Dampers and Hard-Wired Power Supply for Zebra MC3300
-
Out of stockVehicle Cradle with Top Support and Hard-Wired Power Supply for Zebra MC3300. This design accommodates the standard model as well as the gun format and the turret/rotating top model. The holder comes with the AMPS hole pattern for quick attachment to any flat surface. Custom fit to bare device. Accommodates standard and gun models. Top support keeps the device in place during intense vibrations. AMPS hole pattern for attachment to any mount
-
Out of stockVehicle Cradle with Hard-Wired Power Supply for Zebra MC3300
-
Out of stock4-Slot Desktop Charging Dock, TA2, TA3, TAPRO
-
Out of stockSwiveling Top Support Add-On for Zebra MC9300 Vehicle Cradles
-
Out of stockPROCLIP ANGLE MOUNT, Extra strength mounting platform - Dodge/RAM ProMaster Van 2019+
-
Out of stockThis Extension Plate has pre-drilled holes for the AMPS hole pattern. This allows additional holders to be added to existing mounts. It features up to 5 positions in either portrait or landscape orientation. Additional holes allow for cables to be run through the plate for a clean installation. Extension plate allows an additional device holder to be added. Multiple Locations for AMPS hole pattern mounts. Made from durable steel. 11.8 in (30 cm) x 2.36 in (6 cm) x .12 in (3 mm)
-
The VESA ProClip adapter plate attaches to any existing VESA 75mm or 100mm mounting system. Use to create a new recessed mounting surface to allow the attachment of ProClip specific holders. 4 pre-drilled AMPS pattern pilot holes to attach ProClip holders more securely. 5 mm Diameter Holes accommodate up to M5 screws
-
Out of stockThis kit offers an easy and secure way to mount your DS8100-HC cradle. Provides custom fit mount plate for Presentation Cradle. Includes quick release dock for easy removal of the cradle. Pre-drilled holes for AMPS hole patterns
-
This cradle is Custom Fit For: Zebra TC20 and TC25. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or AMPS compatible mounting brackets. - Custom fit to your bare device - Rotating Top Support and vibration damper for added device stability in rough environments - Rotate between portrait and landscape view - Hard-wire to 12 ~ 24 V vehicle power sources - Provides 10 Watts (2A) charging power
