-
Out of stockPROCLIP ANGLE MOUNT, Extra strength mounting platform - Dodge/RAM ProMaster Van 2019+
-
Out of stockSwiveling Top Support Add-On for Zebra MC9300 Vehicle Cradles
-
Out of stock4-Slot Desktop Charging Dock, TA2, TA3, TAPRO
-
Out of stockVehicle Cradle with Hard-Wired Power Supply for Zebra MC3300
-
Out of stockVehicle Cradle with Top Support and Hard-Wired Power Supply for Zebra MC3300. This design accommodates the standard model as well as the gun format and the turret/rotating top model. The holder comes with the AMPS hole pattern for quick attachment to any flat surface. Custom fit to bare device. Accommodates standard and gun models. Top support keeps the device in place during intense vibrations. AMPS hole pattern for attachment to any mount
-
Vehicle Cradle with Top Support, Vibration Dampers and Hard-Wired Power Supply for Zebra MC3300
-
This tablet cradle is designed to fit the Zebra L10 tablet in both the XSLate and XPad format. The key lock will slide through the handle of the Xpad version or over the top of the XSlate and provide a secure hold for the device. - This cradle doesn't block the rear facing camera. - The cradle is designed to fit the Zebra xDIM V3 module to add power and USB ports as needed for external accessories such as RFID readers or bar code scanners. - Includes AMPS and VESA 75 mounting hole patterns.
-
Out of stockHeavy-Duty Clamp Mount, AMPS, No Arm, 5 x 5.125 Inch Clamp
-
XL Table Stand Holds devices up to 10.1" tablets Allows for use in portrait or landscape view May be permanently attached to a tabletop (extra hardware required)
-
Custom Fit For: Zebra MC9300 - Custom fit to your bare device - One-handed operation - Swiveling Top Support - Vibration Dampers reduce device wear - Keeps screen facing the operator - Fits device with or without hand strap - AMPS hole pattern for attachment to any mount - Forklift installs recommended with - Forklift Mount #215980 - Flat surface installs recommended with - Universal Pedestal #202010
-
Out of stockHeavy-Duty Forklift Mount, 6 Inch Arm, 5 x 5.125 Inch Clamp 90 DEGREE OFFSET 6 INCH PEDESTAL MOUNT HD (Rnd Base Large Teeth, Rnd Base Small Teeth, Wing Nuts)
-
Out of stockHEAVY DUTY ALUMINUM PIPE MOUNT, AMPS M4 THREADED HOLES, INTEGRATED RUBBER PADS DIAMETER: 3/4 IN. TO 1 1/4 IN. (19-30 MM) HOLE PATTERN: AMPS
-
Vehicle Cradle for Zebra ET51 8.4" with Integrated Barcode Scanner
-
Out of stockVehicle Cradle with Key Lock for Zebra ET51 8.4" with Integrated Barcode Scanner
-
Out of stockPrinter Mount Kit with Battery Access for Zebra ZQ630 QLN 420
-
Out of stockHEAVY DUTY ALUMINUM PIPE MOUNT, AMPS M4 THREADED HOLES, INTEGRATED RUBBER PADS DIAMETER: 1 1/4 IN. TO 1 5/8 IN. (29-42 MM) HOLE PATTERN: AMPS
-
HEAVY DUTY ALUMINUM PIPE MOUNT, AMPS M4 THREADED HOLES AND WORM GEAR CLAMPS DIAMETER: 1 IN. TO 5 IN. (25-130 MM) HOLE PATTERN: AMPS
-
Out of stockQuick Release Power Dock (Quick Charge), Tilt-Swivel and USB Cable
-
Out of stockHardwire Power Supply with Dual USB Ports and 2-Pin Molex Cable Input 12/24V to 2 Pin Molex Port. Output Port 1: 5.25 V, 2.4 A, Output Port 2: Qualcomm quick charge 6V/3A 9V/2A, 12V 1.5A
-
Out of stockHolder with Spring Lock and Rear Camera Access for Zebra L10 Xslate or Xpad
-
4 Slot Desktop Charging Dock Samsung Xcover Pro SM-G715
-
Out of stockHolder for Zebra TC51/52/56/57 in Rugged Boot with Trigger Handle
-
Out of stockDesktop Charging Dock Zebra TC21 TC26
-
Out of stockPrinter Mount with Media Roller and Quick Release Power Dock Zebra ZQ630 QLN 420
-
Heavy Duty Swivel Mount - Round Bases, #1 Heavy Duty Pedestal Teeth, #2 Heavy Duty Pedestal Teeth, 4MM Slots (Fits M4 Fasteners)
-
Out of stockHeavy Duty Swivel Mount - Round Bases, #1 Heavy Duty Pedestal Teeth, #2 Heavy Duty Pedestal Teeth, 5MM Slots (Fits M5 Fasteners)
-
Heavy Duty Swivel, #1 Heavy Duty Pedestal Teeth, #2 Heavy Duty Pedestal Teeth, Does not include base plates.
-
Out of stockCharging Holder Only with Tilt-Swivel, Key Lock Samsung Galaxy Tab Active3 Samsung Galaxy Tab Active2
-
Out of stockCharging Holder Only with Tilt-Swivel, Key Lock and USB Host Port Samsung Galaxy Tab Active3 Samsung Galaxy Tab Active2
-
Out of stockCharging Holder with Wall Adapter - Samsung Galaxy Tab Active Pro
-
Non-Charging Cradle, Screen Facing Away Zebra MC9300 with Boot
-
Out of stock5-Slot Desktop Charging Dock Samsung Xcover Pro in uniVERSE Case
-
Out of stockDesktop Charging Dock Samsung Galaxy Tab Active Series (Active3, Active2, Active Pro Active4Pro)
-
Heavy-Duty Forklift Clamp Mount 3.375" x 5.125"; 7.4" Arm with 360 Degree Swivel (Rnd Base Small Teeth, Rnd Base Small Teeth, Wing Nuts and Lock Nuts)
-
Out of stockHeavy-Duty Forklift Clamp Mount 5" x 5.125" 7.4" Arm with 360 Degree Swivel (Rnd Base Small Teeth, Rnd Base Small Teeth, Wing Nuts and Lock Nuts)
