-
Out of stock855093,, ProClip Center Mount Ford F150 2015-20xx
-
Out of stockAC Wall Power Supply 110-240V 1.3A AC Input 12V 3A DC Output - 6-Pin Molex Interchangeable Wall Plugs 5 Foot Cable
-
Out of stockAC Wall Power Supply, 110-240V 1.3A AC Input, 5.4V 2.7A DC Output - 6-Pin Molex, Interchangeable Wall Plugs, 5 Foot Cable
-
Out of stockUSB Cable Cup Assembly for XP20 (Power supply AC-XP-1 is required to charge a device)
-
Out of stockSerial Cable Cup Assembly for XP30 Series (AC-XP-1 or VA-XP-1 is required to charge a device)
-
Out of stockUSB Cable Cup Assembly for XM Series and XP30 Series (AC-XP-1 or VA-XP-1 is required to charge a device)
-
Out of stockCable Cup Assembly, RJ45, for XP20 (AC-XP-1 or VA-XP-1 is required to charge a device)
-
Out of stockCable Cup Assembly, RJ45, for XM Series and XP30 (AC-XP-1 or VA-XP-1 is required to charge a device)
-
Out of stockAC/DC Power Supply for XT2 Cradle (5.0V/4A) with US/UK/EUR Adapters
-
Out of stockPower Supply (Requires Line Cord - LC-XP-1) for XP/XM Single Slot Cradle
-
Out of stockRetractable Locking Tether with Adjustable Shoulder Strap for HL-P-001 & HL-P-003
-
Out of stockPadded Large Width Shoulder Strap for Dual D-Clip mounted cases - Two clips (XM70, XT1, XT2, XP)
-
Out of stock5 Inch Universal Pedestal Mount Includes 2 Steel 20mm Ball AMPS Plates
-
Out of stockUniversal Pedestal Mount 6.5" Inch or 5" Steel 20mm Ball AMPS Plates M5 AMPS Holes
-
Out of stockThis Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. This mount swivels 360 degrees horizontally and vertically. It extends 11 in / 280 mm and can be attached to any smooth flat surface. The face plate has an AMPS hole pattern to accommodate most holders, cradles, mounts and car kits. - This item does not come with fasteners.
-
Out of stockThis Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. This mount swivels 360 degrees horizontally and vertically. It extends 6.3 inches/ 160 mm and can be attached to any smooth flat surface. The face plate has an AMPS hole pattern to accommodate most holders, cradles, mounts and car kits. - This item does not come with fasteners.
-
Out of stockPROCLIP CENTER MOUNT Extra strength mounting platform. - Ford Excursion 2008 - 2016 Ford F-250/350/450/550/Super Duty 2008 - 2016 Ford F-650/750 2008 - 20xx
-
Out of stockPROCLIP ANGLE MOUNT Extra strength mounting platform. - Ford Excursion 2008 - 2016 Ford F-250/350/450/550/Super Duty 2008 - 2016 Ford F-650/750 2008 - 20xx
-
Out of stockPROCLIP CENTER MOUNT, Extra strength mounting platform. - Volvo VNL/VNR 2018 - 20xx
-
Out of stockFor installation of devices on pipes and stays, for example most types of vehicles; motorcycles, boats, carts, stands, wheelchairs, airplanes etc. The mount has a mounting plate sized 50x42 mm with pre-drilled AMPS-holes. The mount fits round and oblong bars 0.875 in. to 1.25 in. (22.22 mm to 31.75 mm). Made in black plastic.
-
Out of stockPrinter Mount Plate for Battery Eliminator TSC Alpha 30L / 40L
-
Out of stockPROCLIP ANGLE MOUNT - Mack Granite 2012 - 2018 Mack Pinnacle 2012 - 2018
-
Out of stockPROCLIP ANGLE MOUNT - Kenworth C500 / T170 / T270 / T300 / T370 / T440 / T600 / T660 / T680 / T800 / T880 / W900 2005 - 2012 W900 2005 - 2020
-
Out of stockCustom fit to your bare device - iPad 2,3 and 4. Easily slide device in and out of holder - Includes Tilt-Swivel to angle holder 15 degrees. - Rotate between portrait and landscape view. This is a special order item. Please allow an additional 2-3 week lead time. - Due to the size of the iPad it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the iPad will fit in that location.
-
Out of stockStandard Holder for Samsung Galaxy Tab A7 Lite 8.7" (2021 SM-T220 SM-T225 SM-T227)
-
Out of stockAMPS Mount Kit 4 - M6 x 12mm Fasteners, Split Lock Washers M4 Universal Fastener Pack Zebra VC80, VC80x, VC8300
-
Out of stockThis mount swivels 360 degrees horizontally and vertically. It extends 7.48 inches/ 190 mm and can be attached to any smooth flat surface. The face plate has an AMPS hole pattern to accommodate most holders, cradles, mounts and car kits. - This item does not come with fasteners. - Color: Black - Material: Aluminum & Plastic - Total length: 7.48 inches / 190 mm - Suction cup Diameter: 3.54 inches / 90 mm - Wingnuts for easy adjustment
-
Out of stockPROCLIP CENTER MOUNT - Ford Transit 2014 - 2019
-
Out of stockPROCLIP CENTER MOUNT - Ford E-Series 2009 - 20xx. This ProClip Vehicle Center Mount is a custom made car specific mount. The mount attaches to the center area of the car dashboard. The ProClip Center Mount is a very sturdy mounting bracket that clips tightly into the seams of the dashboard. No drilling holes or dismantling of the dashboard is required, simply clip on in seconds.
-
Hino 200/300 Angled Mount - Commercial Mounting Platform, strong enough to hold a device in the Tough Sleeve.The mount attaches to the upper center right of the center dash. Device Holder NOT included, sold separately.Comes with a pre-drilled hole pattern for device attachment. A device holder can easily be attached anywhere on the face plate. Compatibel with: Hino 200-Series 2005 - 2020, Hino 300-Series 2005 - 2020
-
Out of stockSMALL PEDESTAL MOUNT WITH MULTI ANGLE TILT SWIVEL
-
Out of stockRecommended for high vibration applications like forklifts. Add Swiveling Top Support to existing installations. Fits Tilt/Swivel, Holders and Vehicle Cradles. Works in Landscape or Portrait Orientation. Adjustable from 3.35 in (85 mm) to 3.94 (100 mm)
