-
Out of stockFor installation of devices on pipes and stays, for example most types of vehicles; motorcycles, boats, carts, stands, wheelchairs, airplanes etc. The mount has a mounting plate sized 50x42 mm with pre-drilled AMPS-holes. The mount fits round and oblong bars 0.875 in. to 1.25 in. (22.22 mm to 31.75 mm). Made in black plastic.
-
Out of stockFor installation of devices on pipes and stays, for example most types of vehicles; motorcycles, boats, carts, stands, wheelchairs, airplanes etc. The mount has a mounting plate sized 50x42 mm with pre-drilled AMPS-holes. The mount fits round and oblong bars 0.875 in. to 1.25 in. (22.22 mm to 31.75 mm)
-
Out of stockPrecision machined from solid core aluminum rod, this Heavy-Duty Extension Rod provides the means to lengthen or customize your ProClip Heavy-Duty Mount and includes bolt and wingnut. - The teeth machined into the joints at each end of the rod are specifically compatible with our Heavy-Duty mounts. The interlocking joint design adjusts incrementally by 11.25 degrees. - Compatible with all ProClip Heavy-Duty Mounts - Available in 2, 4, 6 and 8 Inch Lengths
-
Out of stockPrecision machined from solid core aluminum rod, this Heavy-Duty Extension Rod provides the means to lengthen or customize your ProClip Heavy-Duty Mount and includes bolt and wingnut. - The teeth machined into the joints at each end of the rod are specifically compatible with our Heavy-Duty mounts. The interlocking joint design adjusts incrementally by 11.25 degrees. - Compatible with all ProClip Heavy-Duty Mounts - Available in 2, 4, 6 and 8 Inch Lengths
-
Out of stockA pivoting AMPS mounting plate for use with ProClip aluminum pedestal mounts. Can be attached to the top of any of our mounts to provide a 180 degree pivot to face either direction. Great for when a device needs to be seen by multiple users.
-
Out of stockPrecision machined from solid core aluminum rod, this Heavy-Duty Extension Rod provides the means to lengthen or customize your ProClip Heavy-Duty Mount and includes bolt and wingnut. - The teeth machined into the joints at each end of the rod are specifically compatible with our Heavy-Duty mounts. The interlocking joint design adjusts incrementally by 11.25 degrees. - Compatible with all ProClip Heavy-Duty Mounts - Available in 2, 4, 6 and 8 Inch Lengths
-
Out of stockWing nut kit for use with ProClip aluminum mounts. Allows easy adjustment and removal of mount parts. - Fits all extension rod sizes - Metal spacer for use with ProClip mounts - 1 Wing Nuts / 1 Metal Spacer / 1 Bolts
-
Out of stockA pivoting AMPS mounting plate for use with ProClip aluminum mounts. Can be attached to the top of any of our mounts to provide a 180 degree pivot to face either direction. Great for when a device needs to be seen by multiple users. - 180 degree pivoting head for mounting ProClip device holders - AMPS hole pattern on both head and base to allow use with ProClip mounts or any product that uses the AMPS hole pattern - Easily accessible thumb lever allows you to lock pivot in place
-
Out of stockPerfect for use on square posts. Attach a Device holder for your device to the face plate and you are all set to go. Fits bars and square posts that are 45-50mm wide. Very strong construction. Supports heavy devices. Provides a firm installation
-
Out of stockPerfect for use on square posts. Attach a Device holder for your device to the face plate and you are all set to go. Fits bars and square posts that are 34 - 40mm wide. Very strong construction. Supports heavy devices. Provides a firm installation
-
Perfect for use with all types of forklifts. Attach a custom ProClip device holder directly to the face plate or add a ProClip Mount for even more flexibility. - Works perfectly on the roll bar of a forklift - The forklift mount can be mounted on square surfaces - Multiple sets of AMPS holes makes the fitting of a ProClip mount base easy - Comes with complete set of screws in various sizes, allowing for the forklift mount to span from 130mm to 5mm
-
The ProClip Quick Release Dock works with any ProClip device holder with a Tilt-Swivel. Easily remove a holder from its mounting location without the use of tools. - 15 mm Extended release tab for easy device removal - Allows you to switch device holders without changing the mount - Fits all ProClip Device Holders with Tilt-Swivel or male adapter block
-
Wing nut kit for use with ProClip aluminum mounts. Allows easy adjustment and removal of mount parts. - Fits all extension rod sizes - Metal spacer for use with ProClip mounts - 2 Wing Nuts / 2 Metal Spacers / 2 Bolts
-
Out of stockFor installation of devices on pipes and stays, for example most types of vehicles; motorcycles, boats, carts, stands, wheelchairs, airplanes etc. The mount has a 45 degree mounting plate sized 160x50 mm with 6 pre-drilled holes. The mount fits pipes with diameter 19 mm or 3/4 inch is the smallest diameter pipe or bar. 30 mm or 1 1/8 inch is the largest diameter pipe or bar. Made in black plastic.
-
Out of stockFor installation of devices on pipes and stays, for example most types of vehicles; motorcycles, boats, carts, stands, wheelchairs, airplanes etc. The mount has a 90 degree mounting plate sized 160x50 mm with 6 pre-drilled holes. The mount fits pipes with diameter 19 mm or 3/4 inch is the smallest diameter pipe or bar. 30 mm or 1 1/8 inch is the largest diameter pipe or bar. Made in black plastic.
-
Out of stockFor installation of devices on pipes and stays, for example most types of vehicles; motorcycles, boats, carts, stands, wheelchairs, airplanes etc. The mount has a mounting plate sized 50x42 mm with pre-drilled AMPS-holes. The mount fits pipes with diameter 19 mm or 3/4 inch is the smallest diameter pipe or bar. 30 mm or 1 1/8 inch is the largest diameter pipe or bar. Made in black plastic.
-
Out of stockFor installation of devices on pipes and stays, for example most types of vehicles; motorcycles, boats, carts, stands, wheelchairs, airplanes etc. The mount has a mounting plate sized 160x50 mm with 6 pre-drilled holes. The mount fits pipes with diameter 19 mm or 3/4 inch is the smallest diameter pipe or bar. 30 mm or 1 1/8 inch is the largest diameter pipe or bar. Made in black plastic.
-
Out of stockMultiStand for Apple iPad Mini with Retina display. This Holder is made to fit the tablet without a case. Easily snap your device in and out of the holder. Provides for safer driving when viewing, accessing and operating your device in the vehicle. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Combine with a ProClip vehicle mount to make a full mounting solution
-
Out of stockThe VESA ProClip adapter plate attaches to any existing 75mm and 100mm VESA mounting system to create a new flat mounting surface to allow the attachment of ProClip specific mounts and other mounts/devices.
-
M4 x 12mm Hex Cap Screws with Nyloc Nuts (4 pk), Blk. These black cap screws and lock nuts are an effective way to attach any ProClip device holder directly to the base plate of any one of our Standard Duty or Heavy Duty Mounts.
-
Out of stockAngled Top Part - 60 Degrees Angles the top part of the Pedestal Fits both Solid Core and Hollow Core Pedestals Dual AMPS-hole patterns for mounting of a device holder
-
Out of stockSuper-Duty Pedestal Mount with Square Bases - 10" Length
-
Out of stockIf you need to attach a device holder or a angled top plate to one of our pedestals this set of screws is a perfect fit. Includes four screws and locking nuts for a secure hold. Extra screw set for aluminum pedestal mounts. Fits round plastic base with threaded inserts. Includes: 4 screws / 4 lock nuts
