-
For installation into vehicle power supply - Works with forklifts and other vehicles that use up to 48 volt direct current (VDC) power systems - Input Voltage Tolerance of up to 60 VDC - Converts 60V, 48V, 36V, 24V, and 18V systems to 12V - 36W continuous output. Go to our website at https://www.proclipusa.com/product/48v-to-12v-power-converter?sSearch=71 0872 for complete specifications
-
Barrel plug fits matching socket on ET5X series charging holders - Output: 12 volt 4.16 amp. AC power cord for use with ET50 and ET55 holders. Provides power to charge tablet via US 110v outlets.
-
Out of stockThis Travel Mount Kit is a windshield suction cup mount designed to accommodate the ProClip custom device holders so you can easily bring your device holder when you travel. ProClip Suction Cup Mount Kit with Locking Move Clip - Designed to fit with most ProClip Device Holders (not for tablet holders) Easily move holder between vehicle mount and travel mount - Secure suction cup that will adhere to any smooth non-porous surface - 3M adhesive dash mount disk for dashboard or console attachment
-
Out of stockNon-Charging Cradle Zebra ET40/ET45 10" (with Rugged Boot) Supports Expansion Back
-
Out of stockNon-Charging Cradle Zebra ET40/ET45 8" (with Rugged Boot) Supports Expansion Back
-
Out of stockNon-Charging Cradle Zebra ET40/ET45 10" (with Rugged Boot)
-
Out of stockNon-Charging Cradle Zebra ET40/ET45 10" (Bare Tablet)
-
Out of stockNon-Charging Cradle Zebra ET40/ET45 8" (with Rugged Boot)
-
Out of stockNon-Charging Cradle Zebra ET40/ET45 8" (Bare Tablet)
-
Out of stockNon-Charging Cradle Requires Rugged Frame Supports Expansion Back Scanner Accessible While Docked Hot-Swap Battery Access While Docked Zebra ET50/51/55/56 8.3"" and 8.4
-
Out of stockNon-Charging Cradle Requires Rugged Frame Supports Expansion Back Scanner Accessible While Docked Hot-Swap Battery Access While Docked Zebra ET50/51/55/56 10.1
-
Out of stockHolder for Zebra ET51 8.4" with Integrated Barcode Scanner
-
Out of stockCradle with Swiveling Top Support Custom Fit For: Zebra MC9300 - Custom fit to your bare device - One-handed operation - Swiveling Top Support - Keeps screen facing the operator - Fits device with or without hand strap - Forklift installs recommended with Forklift Mount #215980 - Flat surface installs recommended with Universal Pedestal #202010
-
Out of stockStandard Cradle Custom Fit For: Zebra MC9300 - Custom fit to your bare device - One-handed operation - Keeps screen facing the operator - Fits device with or without hand strap - Forklift installs recommended with Forklift Mount #215980 - Flat surface installs recommended with - Universal Pedestal #202010
-
Out of stockCharging Cradle with Tilt-Swivel and Cigarette Lighter Adapter - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Works with Standard and Extended batteries. - This is a special order item. Please allow an additional 2-3 week lead time.
-
Out of stockTop Support Heavy Duty Charging Cradle with Straight Cord Cigarette Lighter Plug - Custom Fit For: Zebra TC70 / TC72 / TC75 / TC77 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Cable with 12 V power plug included - Cord length is 39 inch / 99 cm - Input Voltage: 10-30 VDC, 1.7A - Output Voltage: 5 VDC, 3A - LED illuminated power indicator
-
Top Support Charging Cradle with Straight Cord Cigarette Lighter Plug - Custom Fit For: Zebra TC70 / TC72 / TC75 / TC77 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Custom Fit For: Zebra TC70 / TC72 / TC75 / TC77 - Item: 560753 - Custom fit to your bare device - Includes Tilt-Swivel to angle holder 15 degrees any direction - Rotate between portrait and landscape view
-
Out of stockCharging Cradle with Straight Cord Cigarette Lighter Plug Custom Fit For: Zebra TC70 / TC72 / TC75 / TC77 Bare Device
-
Out of stockCharging Cradle with Straight Cord Cigarette Lighter Plug (For device with TC55 Boot). - Power Specs: - USB cable with 12 V power plug included - Cord length is 39 inch / 99 cm - Works in any 12 V vehicle power outlet - Provides up to 10 Watts (2.1A) charging power - Power plug converts from 12 V to 5 V output - LED illuminated power indicator
-
Out of stockCharging Cradle with Straight Cord Cigarette Lighter Plug Custom Fit For: Zebra TC55 bare device. Power Specs: - USB cable with 12 V power plug included - Cord length is 39 inch / 99 cm - Works in any 12 V vehicle power outlet - Provides up to 10 Watts (2.1A) charging power - Power plug converts from 12 V to 5 V output - LED illuminated power indicator
-
Out of stockVehicle Charging Cradle with Cigarette Lighter Plug - Custom Fit For: Zebra MC9500 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - USB cable with 12 V power plug included - Cord length is 39 inch / 99 cm - Works in any 12 V vehicle power outlet - Provides up to 10 Watts (2.1A) charging power - Power plug converts from 12 V to 5 V output - LED illuminated power indicator
-
Out of stockCharging Cradle with Tilt-Swivel and Straight Cord Cigarette Lighter Plug - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Compatible with Motorola MC55, MC65, MC67. Works with Standard or Extended Batteries.
-
Out of stockTough Sleeve for Hard-Wired Installation. Custom fit to your bare device iPad 9.7 (5th Gen 2017 & 6th Gen 2018) and iPad Air. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Tough Sleeves are too heavy for standard ProClip mounts. An extra strength mount or an aluminum pedestal mount is recommended.
-
Out of stockTOUGH SLEEVE FOR HARD WIRED INSTALLATION Samsung Galaxy Tab A 10.1 (2016 SM-T580)
-
Out of stockTough Sleeve for Hard-Wired Installation. Custom Fit For: Samsung Galaxy Tab E 8.0. Rugged, Mountable Case with Integrated Charging. Passes 6 ft Drop-Test to Concrete. Hard-Wired Power Harness for 12/24V Power Source. One Handed Quick Release via Quick Release Power Dock Docking Interface. This sleeve exceeds the capacity of certain ProClip standard dashboard mounts. Only an Extra Strength Dashboard Mount or ProClip Pedestal Mount is recommended.
-
Out of stockTough Sleeve with USB Cigarette Lighter Plug. Custom Fit For: Samsung Galaxy Tab E 8.0. Rugged, Mountable Case with Integrated Charging. Passes 6 ft Drop-Test to Concrete. Charging Cord with USB Cigarette Lighter Plug. One Handed Quick Release via Quick Release Power Dock Docking Interface. This sleeve exceeds the capacity of certain ProClip standard dashboard mounts. Only an Extra Strength Dashboard Mount or ProClip Pedestal Mount is recommended.
-
Out of stockKey Lock Tough Sleeve with USB Cigarette Lighter Plug. Custom Fit For: Samsung Galaxy Tab E 8.0. Rugged, Mountable Case with Integrated Charging. Passes 6 ft Drop-Test to Concrete. Charging Cord with USB Cigarette Lighter Plug. This sleeve exceeds the capacity of certain ProClip standard dashboard mounts. Only an Extra Strength Dashboard Mount or ProClip Pedestal Mount is recommended.
-
Out of stockiPad Key Lock Tough Sleeve for Hard-Wired Installation. Custom fit to your bare device iPad Air 2. Key lock for added security. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Tough Sleeves are too heavy for standard ProClip mounts. An extra strength mount or an aluminum pedestal mount is recommended.
-
Out of stockiPad Key Lock Tough Sleeve for Hard-Wired Installation. Custom fit to your bare device iPad 9.7 (5th Gen 2017 & 6th Gen 2018) and iPad Air. Key lock for added security. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Tough Sleeves are too heavy for standard ProClip mounts. An extra strength mount or an aluminum pedestal mount is recommended.
-
Out of stockSamsung Galaxy Tab A 8.0 Key Lock Tough Sleeve for Hard-Wired Installation. Custom Fit For: Samsung Galaxy Tab A 8.0 (2015 SM-T350). Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Tough Sleeves are too heavy for standard ProClip mounts. An extra strength mount or an aluminum pedestal mount is recommended.
-
Out of stockKey Lock Tough Sleeve for Hard-Wired Installation. Custom Fit For: Samsung Galaxy Tab E 8.0. Rugged, Mountable Case with Integrated Charging. Passes 6 ft Drop-Test to Concrete. Hard-Wired Power Harness for 12/24V Power Source. This sleeve exceeds the capacity of certain ProClip standard dashboard mounts. Only an Extra Strength Dashboard Mount or ProClip Pedestal Mount is recommended.
-
Out of stockSpring Lock Charging Holder with USB Cigarette Lighter Plug. Custom Fit For: Samsung Galaxy Tab A 8.0 (2015 SM-T350). Spring lock for quick release of tablet. Custom fit to tablet. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view
-
Out of stockiPad Spring Lock Charging Holder for Hard-Wired Installation for iPad Pro 12.9 (1st Gen 2015) and iPad Pro 12.9 (2nd Gen 2017) - Due to the size of the iPad it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the iPad will fit in that location.
-
Out of stockThis universal adjustable ProClip Tablet holder is designed to fit most 7-10 inch tablets without a case. The holder is designed with the intention to leave as much space open to be able to access the charging port and buttons on your tablet. Once the holder is adjusted for the right size it will allow you to easily insert and remove the device with our spring action corner. With this tablet holder you can use your tablet in landscape or portrait view, and easily rotate between the two positions. You can also angle/tilt the tablet 15 degrees for better viewing and to avoid glare.
-
Out of stockSpring Lock Standard Holder with Cable Attachment. Custom Fit For: Panasonic FZ-B2 & FZ-M1. Spring lock for quick release of tablet. Custom fit to tablet. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view
