-
Out of stockThis holder is made to fit a tablet without a case. Fits most 10 - 12 inch tablets without a case (up to 10 mm thick). Easily slide device in and out of holder with spring action corner. Includes Tilt-Swivel to angle holder 15 degrees any direction. Width adjustment 226 - 309 mm (8.9 - 12.1 in). Height adjustment 151 - 226 mm (5.9 - 8.9 in)
-
Out of stockCradle with Tilt-Swivel. Custom Fit For: Zebra TC55 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
-
Out of stockMC40 PASSIVE CRADLE - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Works with the MC40 with or without the integrated magnetic stripe reader - This is a special order item. Please allow an additional 2-3 week lead time.
-
Out of stockCustom fit to your bare device - iPad 2,3 and 4. Easily slide device in and out of holder - Includes Tilt-Swivel to angle holder 15 degrees. - Rotate between portrait and landscape view. This is a special order item. Please allow an additional 2-3 week lead time. - Due to the size of the iPad it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the iPad will fit in that location.
-
Out of stockCradle with Tilt-Swivel. Custom Fit For: Zebra MC9500 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
-
Out of stockCRADLE with Tilt-Swivel. Custom Fit For: Zebra MC55 / MC65 / MC67 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
-
Out of stockThis cradle is custom fit to the Zebra ET5x 10.1 bare tablet - This cradle is machined from ABS and Acetal polymers and features AMPS and 75mm VESA hole patterns for easy attachment to vehicles, work carts or flat surfaces. - Custom fit to bare tablet - Does not angle or rotate; providing a solid mounting platform - Recommended with ProClip mounts and pedestals.
-
This cradle is custom fit to the Zebra ET5x 8.3 bare tablet - This cradle is machined from ABS and Acetal polymers and features AMPS and 75mm VESA hole patterns for easy attachment to vehicles, work carts or flat surfaces. - Custom fit to bare tablet - Does not angle or rotate; providing a solid mounting platform - Recommended with ProClip mounts and pedestals.
-
Out of stockTOP SUPPORT HOLDER WITH VIBRATION DAMPER Zebra TC8000/8300
-
Out of stockZEBRA TC8000/8300 CRADLE W/ VIBE DAMPER. This is a custom made CRADLE for the TC8000. It keeps your device in an upright position. No more fumbling around for your device. Provides for safer driving when viewing, accessing and operating your device. The CRADLE comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, pedestal mounts or pipe mounts.
-
Out of stockZebra TC8000/8300 CRADLE with Swivel Lock. This is a custom made cradle for the TC8000. It keeps your device in an upright position. No more fumbling around for your device. Provides for safer driving when viewing, accessing and operating your device. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, pedestal mounts or pipe mounts.
-
Zebra TC8000/8300 CRADLE. This is a custom made cradle for the TC8000. It keeps your device in an upright position. No more fumbling around for your device. Provides for safer driving when viewing, accessing and operating your device. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, pedestal mounts or pipe mounts.
-
Out of stockET50 Charging PCBA with USB Port Direct and Tablet Provided 5V Power Fits All Zebra ET50 Charging Cradles
-
Out of stockVehicle Charging Cradle Hardwired for Zebra MC9500. Custom fit to your bare device - Includes Tilt-Swivel to angle holder 15 degrees any direction - Rotate between portrait and landscape view
-
Out of stockVehicle Charging Cradle with Cigarette Lighter Plug for Zebra MC9500. Custom fit to your bare device - Includes Tilt-Swivel to angle holder 15 degrees any direction - Rotate between portrait and landscape view
-
Out of stockCharging Holder, Key Lock and Wall Adapter Samsung Galaxy Tab Active Pro
-
Out of stockAdjustable Phone Holder for Rugged Cases - Device thickness: 11-14 mm (0.43-0.55 inches) - Device thickness: 11-14 mm (0.43-0.55 inches). This Large Adjustable Universal Holder is designed to hold devices used with a rugged case. You make a one time easy adjustment to have the best fit for your device. When you switch cases you can re-adjust the holder for a better fit. Rotate in portrait and landscape view, great for navigation.
-
Large Adjustable ProClip Holder T3 - Device thickness: 12-16 mm (0.47-0.62 inches) - Width adjustment: 75-89 mm (2.95-3.50 inches). This Large Adjustable Universal Holder is designed to hold devices used without or with a skin or case. You make a one time easy adjustment to have the best fit for your device with or without a case. When you switch cases you can re-adjust the holder for a better fit. Rotate in portrait and landscape view, great for navigation.
-
Out of stockLarge Adjustable ProClip Holder T2 - Device thickness: 9-13 mm (0.35-0.51 inches) - Device thickness: 9-13 mm (0.35-0.51 inches). This Large Adjustable Universal Holder is designed to hold devices used without or with a skin or case. You make a one time easy adjustment to have the best fit for your device with or without a case. When you switch cases you can re-adjust the holder for a better fit. Rotate in portrait and landscape view, great for navigation.
-
Out of stockAdjustable Phone Holder - Device thickness: 6-10 mm (0.24-0.39 inches) - Width adjustment: 75-89 mm (2.95-3.50 inches). This Large Adjustable Universal Holder is designed to hold devices used without or with a skin or case. You make a one time easy adjustment to have the best fit for your device with or without a case. When you switch cases you can re-adjust the holder for a better fit. Rotate in portrait and landscape view, great for navigation.
-
Out of stockAdjustable Phone Holder for Rugged Cases - Device thickness: 8-13 mm (0.31-0.51 inches) - Width adjustment: 75-89 mm (2.95-3.50 inches). This Large Adjustable Universal Holder is designed to hold devices used without or with a skin or case. You make a one time easy adjustment to have the best fit for your device with or without a case. When you switch cases you can re-adjust the holder for a better fit. Rotate in portrait and landscape view, great for navigation.
-
Out of stockMEDIUM ADJUSTABLE HOLDER WITH Tilt-Swivel UM-3 Inner Groove width: 12 mm (0.24 inches) Width adjustment: 62 - 77 mm (2.44 - 3.03 inches)
-
Out of stockPROCLIP ANGLE MOUNT - Kenworth C500 / T170 / T270 / T300 / T370 / T440 / T600 / T660 / T680 / T800 / T880 / W900 2005 - 2012 W900 2005 - 2020
-
Out of stockQuick Release Dock, 45mm Release Lever, Tilt-Swivel and Hard-Wired Power Supply
-
Out of stockMETAL MOUNT MOQ 25 PCS PROCLIP ANGLE MOUNT - Kenworth T370 2002 - 20xx
-
Out of stockPROCLIP ANGLE MOUNT - Volvo FH/FM/FMX/NH/VHD/VN/VNL/VNM/VT-series 2003 - 2018
-
Out of stockGolf Cart Mount With Quick Release Attachment. Custom made pedestal designed to be attached to the steering column on a golf cart. Pre-installed quick release move clip ensures compatibility with all ProClip device holders. AMPS ring allows you to re-position the angle to ensure optimal placement of your device. Thumb screw allows quick and easy installation and removal without damaging the column. Vertical arm tilts and rotates to allow maximum visibility
-
Out of stockProClip Small Universal Tablet Holder for use with a case. Fits most 7-10 inch tablets with a protective case like the OtterBox. Easily slide device in and out of holder with spring action corner. Includes Tilt-Swivel to angle holder 15 degrees any direction. Width adjustment 226-309 mm (8.9-12.1 inches). Height adjustment 151-226 mm (5.9-8.9 inches)
-
Out of stockCHARGING CRADLE FOR HARD WIRED INSTALLATION - Zebra MC55/MC65/MC67 - Custom fit to your bare device - Includes directly attached cigarette lighter adapter - Fits standard and extended batteries - AMPS Compatible hole pattern for attaching to existing pedestals and mounts.
-
Out of stockCHARGING CRADLE WITH CIGARETTE LIGHTER PLUG - Zebra MC55/MC65/MC67 - Custom fit to your bare device - Includes directly attached cigarette lighter adapter - Fits standard and extended batteries - AMPS Compatible hole pattern for attaching to existing pedestals and mounts.
-
Out of stockPEDESTAL MOUNT KIT 6 INCH WITH SWIVEL HEAD (Pre-assebled with 4 inch Circular Plate, 6 Inch Pedestal Mount, Swivel Head, Locking Move Clip Heavy Duty Female Plate)
-
Out of stockCharging Holder with Dual USB Hard-Wired Power Supply iPad 10.2 (7th Gen 2019) iPad 10.2 (8th Gen 2020) Fits OtterBox Defender Case
-
Out of stockUniversal Holder with Top Support Adjustable Side Width Adjustable Top Support (Height, Left or Right Side) Fits Phones in Medium to Large Cases Includes Extension Plate and Move Clip
