-
Out of stockLarge Key-Locking Universal Tablet Holder
-
Out of stockMedium Key-Locking Universal Tablet Holder
-
Out of stockHOLDER WITH TILT SWIVEL AND KEY LOCK Microsoft Surface Pro 7 Surface Pro 6 Surface Pro (2017) Surface Pro 4 with pen support
-
Out of stockKey Lock Holder with Cable Attachment. Custom Fit For: Panasonic FZ-B2 & FZ-M1. For Use With or Without Handstrap. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. This is a special order item. Please allow an additional 2-3 week lead time. All holders are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone.
-
Out of stockPANASONIC Key Lock Standard Holder Custom Fit For: Panasonic FZ-B2 & FZ-M1 without a case. Easily slide device in and out of holder - Includes Tilt-Swivel to angle holder 15 degrees any direction - Rotate between portrait and landscape view.
-
Out of stockThis Holder is made to fit the iPad Air 2 tablet with OtterBox Defender case and includes Key Lock.
-
Out of stockSurface Pro 3 Key Lock Holder for UAG case. Custom Fit For: Microsoft Surface Pro 3. Custom fit to your device with UAG case. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Combine with a ProClip vehicle mount for a full mounting solution. ONLY for Surface Pro 3 with UAG Scout or UAG Rogue case. All holders are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone.
-
Out of stockHOLDER WITH TILT SWIVEL AND KEY LOCK Panasonic FZ- G1
-
Out of stockThis Holder is made to fit the Microsoft Surface Pro 3 tablet without a case. It is a high quality custom made holder with a neat and discreet design. Easily snap your device in and out of the holder.
-
Out of stockCHARGING HOLDER WITH KEY LOCK, TILT SWIVEL HARD WIRED INSTALLATION iPad 9.7 (2018) iPad 9.7 (2017) iPad Air
-
Out of stockVEHICLE CHARGING HOLDER FOR FIXED INSTALLATION - Motorola CP200 (For use with Li-Ion and Li-Poly batteries)
-
Out of stockCharging Cradle with USB-On-The-Go Cable for Hard-Wired Install. Custom Fit For: Zebra MC55 / MC65 / MC67 - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape - USB On-The-Go cable permanently attached to cradle for data transfer - Charging cable permanently attached to holder - Cord length with black box is 96 inch / 243 cm - Provides 10 Watts (2A) charging power - Hard-wire to 12 / 24 V vehicle power sources - Black box converts from 12 / 24 V to 5 V output
-
Out of stockTop Support Charging Cradle for Hard-Wired Installation. Custom Fit For: Zebra TC70 / TC72 / TC75 / TC77 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Charging cable permanently attached to cradle - Cord length with black box is 96 inch / 243 cm - Provides 10 Watts (2A) charging power - Hard-wire to 12 / 24 V vehicle power sources - Black box converts from 12 / 24 V to 5 V output - LED illuminated power indicator
-
Out of stockCharging Cradle with Cigarette Lighter Plug and USB-On-The-Go Port. For: Zebra MC55 / MC65 / MC67 - Includes Tilt-Swivel to angle cradle 15 degrees any direction portrait and landscape - USB On-The-Go cable permanently attached to cradle for data transfer - Charging cable permanently attached to cradle - Coiled cord length is 19 inch / 49 cm - Stretched cord length is 55 inch / 139 cm - Works in 12 / 24 V vehicle power outlets - Power plug converts from 12 /24 V to 5 V output - LED illuminated power indicator
-
Out of stockADJUSTABLE CHARGING HOLDER WITH Tilt-Swivel FOR HARD WIRED INSTALLATION USB-C to USB-A Universal Holder 75-89mm / 12-16mm
-
Out of stockCharging Holder for Hard-Wired Installation. Custom fit to your bare device iPad 9.7 (5th Gen 2017 & 6th Gen 2018) and iPad Air. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Due to the size of the iPad it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the iPad will fit in that location.
-
Out of stockCHARGING CRADLE WITH TILT SWIVEL, CIGARETTE LIGHTER PLUG, AND TOP SUPPORT Zebra TC70 / TC72 / TC75 / TC77
-
Out of stockZebra ES400 Charging Cradle with Tilt-Swivel and Cigarette Lighter Adapter. - Charging cable permanently attached to cradle - Coiled cord length is 19 inch / 49 cm - Stretched cord length is 55 inch / 139 cm - Works in 12 / 24 V vehicle power outlets - Power plug converts from 12 /24 V to 5 V output - LED illuminated power indicator
-
Out of stockZebra MC9500 Charging Cradle with 18 in. USB on-the-go Cable for Hard-Wired Installation. - Custom fit to your device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - USB On-The-Go cable permanently attached to cradle for data transfer - Combine with a ProClip vehicle mount to make a full mounting solution
-
Out of stockThis cradle is custom fit to the Zebra ET5x 10.1 bare tablet. - Key locking - Does not angle or rotate; providing a solid mounting platform - Recommended with ProClip mounts and pedestals. - All cradles are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone. - NOT FOR USE WITH FORKLIFTS
-
This cradle is custom fit to the Zebra ET5x 8.3 bare tablet. - Key locking - Does not angle or rotate; providing a solid mounting platform - Recommended with ProClip mounts and pedestals. - All cradles are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone. - NOT FOR USE WITH FORKLIFTS
-
Out of stockTop Support Holder. Custom Fit For: Zebra TC70 / TC72 / TC75 / TC77 - Top support clips the device in place for a secure hold - Tilt-Swivel for 15 degree angling and 360 rotation - Attach to ProClip vehicle or pedestal mounts - Custom fit to your bare device - Easily slide device in and out of cradle - Rotate between portrait and landscape view
-
Out of stockCharging Cradle with Cigarette Lighter Plug and 18 in. USB on-the-go Cable. Custom Fit For: Zebra MC9500 - Custom fit to your device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - USB On-The-Go cable permanently attached to cradle for data transfer - Combine with a ProClip vehicle mount to make a full mounting solution
-
Out of stockTop Support Charging Holder with USB Cigarette Lighter Plug. Custom fit to your Bluebird Pidion EF500R. Includes Tilt-Swivel to allow holder to angle 15 degrees in any direction and portrait and landscape view. Charging cable permanently attached to holder. Coiled cord length is 19 inch / 49 cm. Stretched cord length is 55 inch / 139 cm. Provides up to 10 Watts (2.1A) charging power. Works in 12 / 24 V vehicle power outlets. Power plug converts from 12/24V to 5.4V output. LED illuminated power indicator
-
Out of stockCHARGING HOLDER WITH TILT SWIVEL AND USB CIGARETTE LIGHTER PLUG Apple iPad mini 4 / iPad mini (5th Gen 2019)
-
Out of stockCharging Holder with USB Cigarette Lighter Plug. Custom Fit For: Janam XM5. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. USB cable with 12 V power plug included. USB cable permanently attached to holder. Cord length is 39 inch / 99 cm. Works in any 12 V vehicle power outlet. Provides up to 10 Watts (2.1A) charging power. Power plug converts from 12 V to 5 V output. LED illuminated power indicator
-
Out of stockLarge Adjustable Charging Holder T3. Adjustable fit for your device with case. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Device thickness: 12-16 mm (0.47-0.62 inches). Width adjustment: 75-89 mm (2.95-3.50 inches). Reversible USB cable with 12 V power plug included. Works in any 12 V vehicle power outlet. Provides up to 10 Watts (2.1A) charging power. Power plug converts from 12 V to 5 V output. LED illuminated power indicator
-
Out of stockTop Support Charging Cradle for Hard-Wired Installation (for Device with Zebra Rugged Boot). Custom Fit For: Zebra TC51/52/56/57 - Custom fit to device with rugged boot - Top support for more secure fit - Angle cradle 15 degrees in any direction - Allows for portrait and landscape view - AMPS hole pattern for attachment to any mount
-
Out of stockCharging Holder for Hard-wired Installation (for Device without Zebra Rugged Boot) Custom Fit For: Zebra TC51/52/56/57 Custom fit to bare device Includes Tilt-Swivel to allow holder to angle 15 degrees in any direction Tilt-swivel also allows for portrait and landscape view AMPS hole pattern for attachment to any mount
-
Charging cradle for Hard-Wired Installation (for Device with Zebra Rugged Boot). Custom Fit For: Zebra TC51/52/56/57 - Custom fit to device with rugged boot - Includes Tilt-Swivel to allow cradle to angle 15 degrees in any direction - Tilt-swivel also allows for portrait and landscape view - AMPS hole pattern for attachment to any mount
-
Out of stockTop Support Heavy Duty Charging Cradle for Hard-Wired Installation. Custom Fit For: Zebra TC70 and TC75. Includes USB host cable for data syncing. Custom fit to your bare device - Rotating Top Support for added device stability in rough environments - USB Host cable for syncing of other devices - Tilt-swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Hard-wire to 12 ~ 24 V vehicle power sources - Provides 10 Watts (2A) charging power
-
Out of stockTop Support Heavy Duty Charging Cradle for Hard-Wired Installation. Custom Fit For: Zebra TC70 and TC75 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Hard-wire to 12 ~ 24 V vehicle power sources - Provides 10 Watts (2A) charging power
-
Out of stockCharging Holder for Hard-Wired Installation. Custom Fit For: CipherLab CP60. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view
-
Charging Cradle for Hard-Wired Installation. Custom Fit For: Zebra TC70 and TC75 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
-
Out of stockVehicle Charging Cradle for Hard-Wired Installation. (For device with TC55 Boot.) Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view. Charging cable permanently attached to holder - Cord length with black box is 96 inch / 243 cm - Black power conversion box is 3 inch / 7.6 cm - Provides 10 Watts (2A) charging power - Hard-wire to 12 / 24 V vehicle power sources - Black box converts from 12 / 24 V to 5 V output - LED illuminated power indicator
-
Out of stockVehicle Charging Cradle for Hard-Wired Installation. Custom Fit For: Zebra TC55 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
