-
Out of stockTop Support Charging Holder with USB Cigarette Lighter Plug. Custom fit to your Bluebird Pidion EF500R. Includes Tilt-Swivel to allow holder to angle 15 degrees in any direction and portrait and landscape view. Charging cable permanently attached to holder. Coiled cord length is 19 inch / 49 cm. Stretched cord length is 55 inch / 139 cm. Provides up to 10 Watts (2.1A) charging power. Works in 12 / 24 V vehicle power outlets. Power plug converts from 12/24V to 5.4V output. LED illuminated power indicator
-
Out of stockCharging Cradle with Cigarette Lighter Plug and 18 in. USB on-the-go Cable. Custom Fit For: Zebra MC9500 - Custom fit to your device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - USB On-The-Go cable permanently attached to cradle for data transfer - Combine with a ProClip vehicle mount to make a full mounting solution
-
Out of stockTop Support Holder. Custom Fit For: Zebra TC70 / TC72 / TC75 / TC77 - Top support clips the device in place for a secure hold - Tilt-Swivel for 15 degree angling and 360 rotation - Attach to ProClip vehicle or pedestal mounts - Custom fit to your bare device - Easily slide device in and out of cradle - Rotate between portrait and landscape view
-
This cradle is custom fit to the Zebra ET5x 8.3 bare tablet. - Key locking - Does not angle or rotate; providing a solid mounting platform - Recommended with ProClip mounts and pedestals. - All cradles are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone. - NOT FOR USE WITH FORKLIFTS
-
Out of stockThis cradle is custom fit to the Zebra ET5x 10.1 bare tablet. - Key locking - Does not angle or rotate; providing a solid mounting platform - Recommended with ProClip mounts and pedestals. - All cradles are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone. - NOT FOR USE WITH FORKLIFTS
-
Out of stockZebra MC9500 Charging Cradle with 18 in. USB on-the-go Cable for Hard-Wired Installation. - Custom fit to your device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - USB On-The-Go cable permanently attached to cradle for data transfer - Combine with a ProClip vehicle mount to make a full mounting solution
-
Out of stockZebra ES400 Charging Cradle with Tilt-Swivel and Cigarette Lighter Adapter. - Charging cable permanently attached to cradle - Coiled cord length is 19 inch / 49 cm - Stretched cord length is 55 inch / 139 cm - Works in 12 / 24 V vehicle power outlets - Power plug converts from 12 /24 V to 5 V output - LED illuminated power indicator
-
Out of stockCHARGING CRADLE WITH TILT SWIVEL, CIGARETTE LIGHTER PLUG, AND TOP SUPPORT Zebra TC70 / TC72 / TC75 / TC77
-
Out of stockCharging Holder for Hard-Wired Installation. Custom fit to your bare device iPad 9.7 (5th Gen 2017 & 6th Gen 2018) and iPad Air. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Due to the size of the iPad it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the iPad will fit in that location.
-
Out of stockADJUSTABLE CHARGING HOLDER WITH Tilt-Swivel FOR HARD WIRED INSTALLATION USB-C to USB-A Universal Holder 75-89mm / 12-16mm
-
Out of stockCharging Cradle with Cigarette Lighter Plug and USB-On-The-Go Port. For: Zebra MC55 / MC65 / MC67 - Includes Tilt-Swivel to angle cradle 15 degrees any direction portrait and landscape - USB On-The-Go cable permanently attached to cradle for data transfer - Charging cable permanently attached to cradle - Coiled cord length is 19 inch / 49 cm - Stretched cord length is 55 inch / 139 cm - Works in 12 / 24 V vehicle power outlets - Power plug converts from 12 /24 V to 5 V output - LED illuminated power indicator
-
Out of stockTop Support Charging Cradle for Hard-Wired Installation. Custom Fit For: Zebra TC70 / TC72 / TC75 / TC77 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Charging cable permanently attached to cradle - Cord length with black box is 96 inch / 243 cm - Provides 10 Watts (2A) charging power - Hard-wire to 12 / 24 V vehicle power sources - Black box converts from 12 / 24 V to 5 V output - LED illuminated power indicator
-
Out of stockCharging Cradle with USB-On-The-Go Cable for Hard-Wired Install. Custom Fit For: Zebra MC55 / MC65 / MC67 - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape - USB On-The-Go cable permanently attached to cradle for data transfer - Charging cable permanently attached to holder - Cord length with black box is 96 inch / 243 cm - Provides 10 Watts (2A) charging power - Hard-wire to 12 / 24 V vehicle power sources - Black box converts from 12 / 24 V to 5 V output
-
Out of stockVEHICLE CHARGING HOLDER FOR FIXED INSTALLATION - Motorola CP200 (For use with Li-Ion and Li-Poly batteries)
-
Out of stockCHARGING HOLDER WITH KEY LOCK, TILT SWIVEL HARD WIRED INSTALLATION iPad 9.7 (2018) iPad 9.7 (2017) iPad Air
-
Out of stockThis Holder is made to fit the Microsoft Surface Pro 3 tablet without a case. It is a high quality custom made holder with a neat and discreet design. Easily snap your device in and out of the holder.
-
Out of stockHOLDER WITH TILT SWIVEL AND KEY LOCK Panasonic FZ- G1
-
Out of stockSurface Pro 3 Key Lock Holder for UAG case. Custom Fit For: Microsoft Surface Pro 3. Custom fit to your device with UAG case. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Combine with a ProClip vehicle mount for a full mounting solution. ONLY for Surface Pro 3 with UAG Scout or UAG Rogue case. All holders are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone.
-
Out of stockThis Holder is made to fit the iPad Air 2 tablet with OtterBox Defender case and includes Key Lock.
-
Out of stockPANASONIC Key Lock Standard Holder Custom Fit For: Panasonic FZ-B2 & FZ-M1 without a case. Easily slide device in and out of holder - Includes Tilt-Swivel to angle holder 15 degrees any direction - Rotate between portrait and landscape view.
-
Out of stockKey Lock Holder with Cable Attachment. Custom Fit For: Panasonic FZ-B2 & FZ-M1. For Use With or Without Handstrap. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. This is a special order item. Please allow an additional 2-3 week lead time. All holders are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone.
-
Out of stockHOLDER WITH TILT SWIVEL AND KEY LOCK Microsoft Surface Pro 7 Surface Pro 6 Surface Pro (2017) Surface Pro 4 with pen support
-
Out of stockMedium Key-Locking Universal Tablet Holder
-
Out of stockLarge Key-Locking Universal Tablet Holder
-
Out of stockHolder with Key Lock Surface Pro 4, 5, 6, 7 in UAG Metropolis Case
-
This cradle is custom fit to the Zebra ET5x 10.1" tablet with the Rugged Frame and the 30-pin connector and includes Key Lock. APPROVED FOR FORKLIFT INSTALLATIONS. Reinforced Acetal Corner Bumpers. Key Locking. USB 3.0 Port for attaching peripherals. AMPS and VESA 75MM Mounting Holes. Recommended with ProClip standard-duty or heavy-duty forklift mounts.
-
Charging Cradle for ET5X 8.3, Frame, X-Back, Key Lock, USB, Scanner Window. Fits the Zebra ET5x 8.3" Tablet in the Rugged Frame with the 30-Pin Connector installed. Reinforced Acetal Corner Bumpers. Scan Window - Enables scanning while the tablet is docked. Key Locking. USB 3.0 Port for attaching peripherals. AMPS and VESA 75MM Mounting Holes. Recommended with ProClip standard-duty or heavy-duty forklift mounts.
-
Out of stockCharging Cradle for ET5X 8.3 in Frame; Key Lock, USB. APPROVED FOR FORKLIFT INSTALLATIONS. Fits the Zebra ET5x 8.3" Tablet in the Rugged Frame with the 30-Pin Connector installed. Reinforced Acetal Corner Bumpers. USB 3.0 Port for attaching peripherals. AMPS and VESA 75MM Mounting Holes. Recommended with ProClip standard-duty or heavy-duty forklift mounts.
-
Heavy Duty Charging Cradle for ET5X 8.3, Frame, X-Back; Key Lock, USB - APPROVED FOR FORKLIFT INSTALLATIONS - Fits the Zebra ET5x 8.3 Tablet in the Rugged Frame with the 30-Pin Connector installed - Reinforced Acetal Corner Bumpers - Accommodates Scanner Module (Can not scan while docked) - USB 3.0 Port for attaching peripherals - AMPS and VESA 75MM Mounting Holes - Recommended with ProClip standard-duty or heavy-duty forklift mounts.
-
Out of stockHOLDER WITH TILT SWIVEL AND SPRING LOCK iPad 9.7 (2018) iPad 9.7 (2017) iPad Air 1 iPad Air 2 iPad Pro 9.7 (2016)
-
Out of stockHolder with Spring Lock Getac T800 (Fits unit both with and without handstrap. For both standard and SnapBack battery)
-
Out of stockSpring Lock Standard Holder Custom Fit For: Panasonic FZ-B2 & FZ-M1. Custom fit to your bare device. For Use With or Without Handstrap. Spring lock for quick release of tablet. Custom fit to tablet. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view
-
Out of stockSpring Lock Standard Holder with Cable Attachment. Custom Fit For: Panasonic FZ-B2 & FZ-M1. Spring lock for quick release of tablet. Custom fit to tablet. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view
-
Out of stockThis universal adjustable ProClip Tablet holder is designed to fit most 7-10 inch tablets without a case. The holder is designed with the intention to leave as much space open to be able to access the charging port and buttons on your tablet. Once the holder is adjusted for the right size it will allow you to easily insert and remove the device with our spring action corner. With this tablet holder you can use your tablet in landscape or portrait view, and easily rotate between the two positions. You can also angle/tilt the tablet 15 degrees for better viewing and to avoid glare.
-
Out of stockiPad Spring Lock Charging Holder for Hard-Wired Installation for iPad Pro 12.9 (1st Gen 2015) and iPad Pro 12.9 (2nd Gen 2017) - Due to the size of the iPad it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the iPad will fit in that location.
-
Out of stockSpring Lock Charging Holder with USB Cigarette Lighter Plug. Custom Fit For: Samsung Galaxy Tab A 8.0 (2015 SM-T350). Spring lock for quick release of tablet. Custom fit to tablet. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view
