-
Out of stockMEDIUM ADJUSTABLE HOLDER WITH Tilt-Swivel UM-3 Inner Groove width: 12 mm (0.24 inches) Width adjustment: 62 - 77 mm (2.44 - 3.03 inches)
-
Out of stockAdjustable Phone Holder for Rugged Cases - Device thickness: 8-13 mm (0.31-0.51 inches) - Width adjustment: 75-89 mm (2.95-3.50 inches). This Large Adjustable Universal Holder is designed to hold devices used without or with a skin or case. You make a one time easy adjustment to have the best fit for your device with or without a case. When you switch cases you can re-adjust the holder for a better fit. Rotate in portrait and landscape view, great for navigation.
-
Out of stockAdjustable Phone Holder - Device thickness: 6-10 mm (0.24-0.39 inches) - Width adjustment: 75-89 mm (2.95-3.50 inches). This Large Adjustable Universal Holder is designed to hold devices used without or with a skin or case. You make a one time easy adjustment to have the best fit for your device with or without a case. When you switch cases you can re-adjust the holder for a better fit. Rotate in portrait and landscape view, great for navigation.
-
Out of stockLarge Adjustable ProClip Holder T2 - Device thickness: 9-13 mm (0.35-0.51 inches) - Device thickness: 9-13 mm (0.35-0.51 inches). This Large Adjustable Universal Holder is designed to hold devices used without or with a skin or case. You make a one time easy adjustment to have the best fit for your device with or without a case. When you switch cases you can re-adjust the holder for a better fit. Rotate in portrait and landscape view, great for navigation.
-
Large Adjustable ProClip Holder T3 - Device thickness: 12-16 mm (0.47-0.62 inches) - Width adjustment: 75-89 mm (2.95-3.50 inches). This Large Adjustable Universal Holder is designed to hold devices used without or with a skin or case. You make a one time easy adjustment to have the best fit for your device with or without a case. When you switch cases you can re-adjust the holder for a better fit. Rotate in portrait and landscape view, great for navigation.
-
Out of stockAdjustable Phone Holder for Rugged Cases - Device thickness: 11-14 mm (0.43-0.55 inches) - Device thickness: 11-14 mm (0.43-0.55 inches). This Large Adjustable Universal Holder is designed to hold devices used with a rugged case. You make a one time easy adjustment to have the best fit for your device. When you switch cases you can re-adjust the holder for a better fit. Rotate in portrait and landscape view, great for navigation.
-
Out of stockCharging Holder, Key Lock and Wall Adapter Samsung Galaxy Tab Active Pro
-
Out of stockVehicle Charging Cradle with Cigarette Lighter Plug for Zebra MC9500. Custom fit to your bare device - Includes Tilt-Swivel to angle holder 15 degrees any direction - Rotate between portrait and landscape view
-
Out of stockVehicle Charging Cradle Hardwired for Zebra MC9500. Custom fit to your bare device - Includes Tilt-Swivel to angle holder 15 degrees any direction - Rotate between portrait and landscape view
-
Out of stockET50 Charging PCBA with USB Port Direct and Tablet Provided 5V Power Fits All Zebra ET50 Charging Cradles
-
Zebra TC8000/8300 CRADLE. This is a custom made cradle for the TC8000. It keeps your device in an upright position. No more fumbling around for your device. Provides for safer driving when viewing, accessing and operating your device. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, pedestal mounts or pipe mounts.
-
Out of stockZebra TC8000/8300 CRADLE with Swivel Lock. This is a custom made cradle for the TC8000. It keeps your device in an upright position. No more fumbling around for your device. Provides for safer driving when viewing, accessing and operating your device. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, pedestal mounts or pipe mounts.
-
Out of stockZEBRA TC8000/8300 CRADLE W/ VIBE DAMPER. This is a custom made CRADLE for the TC8000. It keeps your device in an upright position. No more fumbling around for your device. Provides for safer driving when viewing, accessing and operating your device. The CRADLE comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, pedestal mounts or pipe mounts.
-
Out of stockTOP SUPPORT HOLDER WITH VIBRATION DAMPER Zebra TC8000/8300
-
This cradle is custom fit to the Zebra ET5x 8.3 bare tablet - This cradle is machined from ABS and Acetal polymers and features AMPS and 75mm VESA hole patterns for easy attachment to vehicles, work carts or flat surfaces. - Custom fit to bare tablet - Does not angle or rotate; providing a solid mounting platform - Recommended with ProClip mounts and pedestals.
-
Out of stockThis cradle is custom fit to the Zebra ET5x 10.1 bare tablet - This cradle is machined from ABS and Acetal polymers and features AMPS and 75mm VESA hole patterns for easy attachment to vehicles, work carts or flat surfaces. - Custom fit to bare tablet - Does not angle or rotate; providing a solid mounting platform - Recommended with ProClip mounts and pedestals.
-
Out of stockCRADLE with Tilt-Swivel. Custom Fit For: Zebra MC55 / MC65 / MC67 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
-
Out of stockCradle with Tilt-Swivel. Custom Fit For: Zebra MC9500 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
-
Out of stockCustom fit to your bare device - iPad 2,3 and 4. Easily slide device in and out of holder - Includes Tilt-Swivel to angle holder 15 degrees. - Rotate between portrait and landscape view. This is a special order item. Please allow an additional 2-3 week lead time. - Due to the size of the iPad it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the iPad will fit in that location.
-
Out of stockMC40 PASSIVE CRADLE - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Works with the MC40 with or without the integrated magnetic stripe reader - This is a special order item. Please allow an additional 2-3 week lead time.
-
Out of stockCradle with Tilt-Swivel. Custom Fit For: Zebra TC55 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
-
Out of stockThis holder is made to fit a tablet without a case. Fits most 10 - 12 inch tablets without a case (up to 10 mm thick). Easily slide device in and out of holder with spring action corner. Includes Tilt-Swivel to angle holder 15 degrees any direction. Width adjustment 226 - 309 mm (8.9 - 12.1 in). Height adjustment 151 - 226 mm (5.9 - 8.9 in)
-
ProClip Large Universal Tablet Holder for use with a case. Fits most 10 - 12 inch tablets with a protective case like the OtterBox - Easily slide device in and out of holder with spring action corner - Includes Tilt-Swivel to angle holder 15 degrees any direction - Width adjustment 226 - 309 mm (8.9 - 12.1 inches) - Height adjustment 151 - 226 mm (5.9 - 8.9 inches)
-
Out of stockADJUSTABLE HOLDER WITH Tilt-Swivel iPhone 6/6s/7/8 for small to medium cases
-
Out of stockADJUSTABLE HOLDER WITH TILT SWIVEL for Apple iPhone 6 Plus / 6s Plus / 7 Plus / 8 Plus / XR with small to medium sized cases
-
Out of stockADJUSTABLE HOLDER iPhone for rugged cases
-
Out of stockADJUSTABLE HOLDER WITH TILT SWIVEL Apple iPhone 12 12 Pro 12 Pro Max with small to medium sized cases
-
Out of stockStandard Cradle Custom Fit For: Zebra TC70 / TC72 / TC75 / TC77 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
-
Out of stockStandard Holder for Galaxy Tab S2 8.0. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Due to the size of the Tablet it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the tablet will fit in that location.
-
Out of stockStandard Holder for Galaxy Tab S2 9.7. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Due to the size of the Tablet it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the tablet will fit in that location.
-
Out of stockSamsung Galaxy Tab E 8.0 Standard Holder. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view
-
Out of stockThis Small universal ProClip Tablet holder is designed to fit most 7-10 inch tablets without a case. The holder is designed with the intention to leave as much space open to be able to access the charging port and buttons on your tablet. Works with or without case (case can be up to 25mm at its thickest point). Top and bottom arms have padded cushions for added friction to ensure a secure fit. Designed to fit small tablets that are 120 - 150 mm (4.72 - 5.91 inches) in width.
-
Out of stockThis Medium universal ProClip Tablet holder is designed to fit most 7-10 inch tablets without a case. The holder is designed with the intention to leave as much space open to be able to access the charging port and buttons on your tablet. Works with or without case (case can be up to 25mm at its thickest point). Top and bottom arms have padded cushions for added friction to ensure a secure fit. Designed to fit medium sized tablets that are 140 - 195 mm (5.51 - 7.68 inches) in width.
