-
Heavy-Duty Forklift Mount, 10 Inch Arm, 3.375 x 5.125 Inch Clamp. Perfect for use with all types of forklifts. Attach a device holder to the included arm and you are all set to go. - Solid-core aluminum for exceptional strength - The forklift mount can be mounted on square surfaces, perfect for forklift cages
-
Out of stockHeavy-Duty Forklift Mount, 8 Inch Arm, 3.375 x 5.125 Inch Clamp. Perfect for use with all types of forklifts. Attach a device holder to the included arm and you are all set to go. - Solid-core aluminum for exceptional strength - The forklift mount can be mounted on square surfaces, perfect for forklift cages
-
Out of stock6 Pin Molex to USB A Cable (300 cm / 9 feet long)
-
Out of stockRecommended for high vibration applications like forklifts. Add Swiveling Top Support to existing installations. Fits Tilt/Swivel, Holders and Vehicle Cradles. Works in Landscape or Portrait Orientation. Adjustable from 3.35 in (85 mm) to 3.94 (100 mm)
-
Out of stockExtension plate allows a MSR device holder to be added to the ET5X with rugged frame Pre-drilled AMPS hole pattern Made from durable ABS plastic
-
Out of stockPEDESTAL MOUNT HD 8 INCH (Rnd Base, Sq Base, Wing Nuts)
-
Out of stockFor installation of devices on pipes and stays; carts, stands, wheelchairs, etc. Smallest diameter pipe or bar - 19mm (3/4 inch). Largest diameter pipe or bar - 30mm (1 1/8 inch). Mounting plate sized 50 x 42mm with pre-drilled holes. Attaches securely to round handlebars or any round pipe. The face plate accommodates all ProClip device holders and other device holders with the AMPS hole pattern
-
Out of stockFor installation of devices on pipes and stays; carts, stands, wheelchairs, etc. Mounting plate sized 50 x 42mm with pre-drilled holes. Attaches securely to round handlebars or any round pipe. The face plate accommodates all ProClip device holders and other device holders with the AMPS hole pattern. Smallest diameter pipe or bar - 29mm (1 5/32 inch). Largest diameter pipe or bar - 40mm (1 9/16 inch)
-
Out of stockDesktop Charging Cradle for Zebra TC51 TC52 TC56 TC57
-
Out of stockStandard Duty Forklift Mount, 5 Inch Arm, 2.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 5 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
-
Standard Duty Forklift Mount, 6 Inch Arm, 2.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 6 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
-
Standard Duty Forklift Mount, 5 Inch Arm, 3.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 5 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
-
Standard Duty Forklift Mount, 6 Inch Arm, 3.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 6 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
-
Out of stockThe VESA ProClip adapter plate attaches to any existing 75mm and 100mm VESA mounting system to create a new flat mounting surface to allow the attachment of ProClip specific mounts and other mounts/devices. Attach to 75mm and 100mm existing VESA systems. Made in Sweden from Durable Machined Aluminum. 4 - Pre-drilled 4mm threaded AMPS pattern holes to easily attach ProClip products
-
Out of stockThis is a high quality custom made plate with a neat and discreet design. Easily slide your cradle onto the plate to provide a stable location for docking the device in & out of the cradle. The industry standard AMPS hole pattern allows easy attachment to any flat surface or ProClip mount. - Designed for the Desk/Wall cradle for DS8100 Series - AMPS hole pattern for easy mounting - Can be attached to a ProClip mount or any flat surface
-
This cradle is Custom Fit For: Zebra TC20 and TC25. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or AMPS compatible mounting brackets. - Custom fit to your bare device - Rotating Top Support and vibration damper for added device stability in rough environments - Rotate between portrait and landscape view - Hard-wire to 12 ~ 24 V vehicle power sources - Provides 10 Watts (2A) charging power
-
Out of stockThis kit offers an easy and secure way to mount your DS8100-HC cradle. Provides custom fit mount plate for Presentation Cradle. Includes quick release dock for easy removal of the cradle. Pre-drilled holes for AMPS hole patterns
-
The VESA ProClip adapter plate attaches to any existing VESA 75mm or 100mm mounting system. Use to create a new recessed mounting surface to allow the attachment of ProClip specific holders. 4 pre-drilled AMPS pattern pilot holes to attach ProClip holders more securely. 5 mm Diameter Holes accommodate up to M5 screws
-
Out of stockThis Extension Plate has pre-drilled holes for the AMPS hole pattern. This allows additional holders to be added to existing mounts. It features up to 5 positions in either portrait or landscape orientation. Additional holes allow for cables to be run through the plate for a clean installation. Extension plate allows an additional device holder to be added. Multiple Locations for AMPS hole pattern mounts. Made from durable steel. 11.8 in (30 cm) x 2.36 in (6 cm) x .12 in (3 mm)
-
Out of stockPROCLIP ANGLE MOUNT, Extra strength mounting platform - Dodge/RAM ProMaster Van 2019+
-
Out of stockSwiveling Top Support Add-On for Zebra MC9300 Vehicle Cradles
-
Out of stock4-Slot Desktop Charging Dock, TA2, TA3, TAPRO
-
Out of stockVehicle Cradle with Hard-Wired Power Supply for Zebra MC3300
-
Out of stockVehicle Cradle with Top Support and Hard-Wired Power Supply for Zebra MC3300. This design accommodates the standard model as well as the gun format and the turret/rotating top model. The holder comes with the AMPS hole pattern for quick attachment to any flat surface. Custom fit to bare device. Accommodates standard and gun models. Top support keeps the device in place during intense vibrations. AMPS hole pattern for attachment to any mount
-
Vehicle Cradle with Top Support, Vibration Dampers and Hard-Wired Power Supply for Zebra MC3300
-
This tablet cradle is designed to fit the Zebra L10 tablet in both the XSLate and XPad format. The key lock will slide through the handle of the Xpad version or over the top of the XSlate and provide a secure hold for the device. - This cradle doesn't block the rear facing camera. - The cradle is designed to fit the Zebra xDIM V3 module to add power and USB ports as needed for external accessories such as RFID readers or bar code scanners. - Includes AMPS and VESA 75 mounting hole patterns.
-
Out of stockHeavy-Duty Clamp Mount, AMPS, No Arm, 5 x 5.125 Inch Clamp
-
XL Table Stand Holds devices up to 10.1" tablets Allows for use in portrait or landscape view May be permanently attached to a tabletop (extra hardware required)
-
Custom Fit For: Zebra MC9300 - Custom fit to your bare device - One-handed operation - Swiveling Top Support - Vibration Dampers reduce device wear - Keeps screen facing the operator - Fits device with or without hand strap - AMPS hole pattern for attachment to any mount - Forklift installs recommended with - Forklift Mount #215980 - Flat surface installs recommended with - Universal Pedestal #202010
-
Out of stockHeavy-Duty Forklift Mount, 6 Inch Arm, 5 x 5.125 Inch Clamp 90 DEGREE OFFSET 6 INCH PEDESTAL MOUNT HD (Rnd Base Large Teeth, Rnd Base Small Teeth, Wing Nuts)
-
Out of stockHEAVY DUTY ALUMINUM PIPE MOUNT, AMPS M4 THREADED HOLES, INTEGRATED RUBBER PADS DIAMETER: 3/4 IN. TO 1 1/4 IN. (19-30 MM) HOLE PATTERN: AMPS
-
Vehicle Cradle for Zebra ET51 8.4" with Integrated Barcode Scanner
-
Out of stockVehicle Cradle with Key Lock for Zebra ET51 8.4" with Integrated Barcode Scanner
