-
Out of stockPROCLIP ANGLE MOUNT - Mack Granite 2012 - 2018 Mack Pinnacle 2012 - 2018
-
Out of stockPROCLIP ANGLE MOUNT - Kenworth C500 / T170 / T270 / T300 / T370 / T440 / T600 / T660 / T680 / T800 / T880 / W900 2005 - 2012 W900 2005 - 2020
-
Out of stockCustom fit to your bare device - iPad 2,3 and 4. Easily slide device in and out of holder - Includes Tilt-Swivel to angle holder 15 degrees. - Rotate between portrait and landscape view. This is a special order item. Please allow an additional 2-3 week lead time. - Due to the size of the iPad it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the iPad will fit in that location.
-
Out of stockStandard Holder for Samsung Galaxy Tab A7 Lite 8.7" (2021 SM-T220 SM-T225 SM-T227)
-
Out of stockAMPS Mount Kit 4 - M6 x 12mm Fasteners, Split Lock Washers M4 Universal Fastener Pack Zebra VC80, VC80x, VC8300
-
Out of stockThis mount swivels 360 degrees horizontally and vertically. It extends 7.48 inches/ 190 mm and can be attached to any smooth flat surface. The face plate has an AMPS hole pattern to accommodate most holders, cradles, mounts and car kits. - This item does not come with fasteners. - Color: Black - Material: Aluminum & Plastic - Total length: 7.48 inches / 190 mm - Suction cup Diameter: 3.54 inches / 90 mm - Wingnuts for easy adjustment
-
Out of stockPROCLIP CENTER MOUNT - Ford Transit 2014 - 2019
-
Out of stockPROCLIP CENTER MOUNT - Ford E-Series 2009 - 20xx. This ProClip Vehicle Center Mount is a custom made car specific mount. The mount attaches to the center area of the car dashboard. The ProClip Center Mount is a very sturdy mounting bracket that clips tightly into the seams of the dashboard. No drilling holes or dismantling of the dashboard is required, simply clip on in seconds.
-
Hino 200/300 Angled Mount - Commercial Mounting Platform, strong enough to hold a device in the Tough Sleeve.The mount attaches to the upper center right of the center dash. Device Holder NOT included, sold separately.Comes with a pre-drilled hole pattern for device attachment. A device holder can easily be attached anywhere on the face plate. Compatibel with: Hino 200-Series 2005 - 2020, Hino 300-Series 2005 - 2020
-
Out of stockSMALL PEDESTAL MOUNT WITH MULTI ANGLE TILT SWIVEL
-
Out of stockRecommended for high vibration applications like forklifts. Add Swiveling Top Support to existing installations. Fits Tilt/Swivel, Holders and Vehicle Cradles. Works in Landscape or Portrait Orientation. Adjustable from 3.35 in (85 mm) to 3.94 (100 mm)
-
Out of stockFor installation of devices on pipes and stays; carts, stands, wheelchairs, etc. Smallest diameter pipe or bar - 19mm (3/4 inch). Largest diameter pipe or bar - 30mm (1 1/8 inch). Mounting plate sized 50 x 42mm with pre-drilled holes. Attaches securely to round handlebars or any round pipe. The face plate accommodates all ProClip device holders and other device holders with the AMPS hole pattern
-
Out of stockQuick Release Power Dock (Quick Charge), Tilt-Swivel and USB Cable
-
Out of stockHolder for Zebra TC51/52/56/57 in Rugged Boot with Trigger Handle
-
Large Universal Scanner Holder Fits up to 3.66 W x 5.67 H x 2.28 D Inches (93x144x58 mm)
-
Out of stockSmall Universal Scanner Holder Fits up to 3.26 W x 4.88 H x 2.28 D Inches (83x124x58 mm)
-
Out of stockStandard-Duty Forklift Clamp Mount, AMPS, No Arm, 3.375 x 5.125 Inch Clamp
-
Out of stockKey Lock Module Zebra ET40/ET45 8" and 10" (Bare Tablet)
-
Out of stockKey Lock Module Zebra ET40/ET45 8" and 10" (with Rugged Boot)
-
Out of stockThe Quick Release Power Dock combines a electrical connection with the convenience of quick release. Can be used with any holder that incorporates the Quick Release Power Dock. Includes USB cord with cigarette lighter adapter for charging. Only for sleeves that feature the Quick Release Power Dock. Allows a Tough Sleeve to be moved between multiple locations. Keeps your device charged while also providing easy removal from the mount. 4 screws + nuts and 1 torx key included
-
Standard scanner mount for Zebra 3600 series
-
Out of stockThis Vibration Damper effectively reduces the shock and vibration transferred to your mobile computing device mounted in particularly demanding environments such as on heavy machinery or forklifts. Simply install the damper (using the included hardeware) between your mobile device holder/cradle and the mounting bracket or Arm that is attached directly to the vehicle or machinery. The machine screws will engage securely with the M4 threaded steel core within the rubber grommets. - Reduce vibration in your mounted device - Supports standard AMPS hole pattern - High density rubber grommets - Maximum supported weight: 1.5 kg (3.31 lbs)
-
Out of stockMETAL MOUNT MOQ 25 PCS PROCLIP ANGLE MOUNT - Kenworth T370 2002 - 20xx
