-
Out of stockHOLDER WITH TILT SWIVEL AND SPRING LOCK Samsung Galaxy Tab Active3 Active2
-
Out of stockHOLDER WITH SPRING LOCK Microsoft Surface Go
-
Out of stockStandard Battery Kit for XT2 (includes 3000mAh 3.8V battery and non-NFC cover)
-
Sale!Out of stockExtended Battery (5800mAh 3.85V) for XT200/XT3 Series
-
Sale!Out of stockCable Cup Assembly, Molex, for XP20 (AC-XP-1 or VA-XP-1 is required to charge a device)
-
Sale!Out of stockCable Cup Assembly, Molex, for XM Series and XP30 (AC-XP-1 or VA-XP-1 is required to charge a device)
-
Sale!Out of stockCable Cup (to charge a device with the cable cup attached, power supply AC-XP-1 is required)
-
Sale!Out of stockBallistic Nylon holster with Belt mounted metal clip and velcro strap for XM2 RFID Series
-
Adapts the VC80, VC80x back hole pattern to industry standard AMPS. Threaded for M4 screws. Recessed for flush mounting
-
Out of stockLeatherette Operating Case with swivel handstrap for XT1
-
Out of stockAvalanche - 1 Mobile Device Management License
-
Sale!Out of stockVM3 UPG LICENSE,WIN/WES7,WIN10-WIN102019
-
Out of stockPORTSMITH USB 2.0 TO 10/100 ETHERNET ADAPTER KIT (Includes cables: 170572-000, 170573-000, 170574-000)
-
PORTSMITH TC55/50 CHARGE ONLY CRADLE KIT (Includes: Cradle, PS)
-
Out of stockPORTSMITH VEHICLE CRADLE- ZEBRA TC7X+BOOT W/HARDWIRE
-
Perfect for use with all types of forklifts. Attach a custom ProClip device holder directly to the face plate or add a ProClip Mount for even more flexibility. - Works perfectly on the roll bar of a forklift - The forklift mount can be mounted on square surfaces - Multiple sets of AMPS holes makes the fitting of a ProClip mount base easy - Comes with complete set of screws in various sizes, allowing for the forklift mount to span from 130mm to 5mm
-
Out of stockThis 2 inch Mount has teeth within the interlocking joints providing a very strong connection. It is made of aluminum and can be used in a variety of vehicles and locations like retail stores, kiosks and gyms. - The mounts come in 2, 4, 6, 8, and 10 inch heights with and AMPS base and top. Mounts can be purchased in complete sets or as individual pieces. The design allows you to mix and match the parts, or combine complete sets with loose parts to create your own unique solution.
-
Out of stockThis aluminum 2 inch Mount has teeth within the interlocking joints providing a very strong connection that can withstand a lot of weight. It provides a mounting platform that can be used on a variety of vehicles and fixed locations and can be used to - mount a wide variety of products such as tablets, mobile computers, printers, and mobile phones. - The mounts come in 2 inch, 4 inch, 6 inch, 8 inch, and 10 inch heights with and AMPS base and top.
-
Out of stockStandard Duty Forklift Mount, 5 Inch Arm, 2.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 5 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
-
Standard Duty Forklift Mount, 6 Inch Arm, 2.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 6 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
-
Standard Duty Forklift Mount, 6 Inch Arm, 3.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 6 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
-
Out of stockHeavy-Duty Clamp Mount, AMPS, No Arm, 5 x 5.125 Inch Clamp
-
Out of stockPrinter Mount Kit for Battery Access Includes Quick Release Dock TSC Alpha 30L / 40L
-
Out of stockMOUNTING BRACKET FOR STARTECH USB-ETHERNET HUB. This item has been revised to include a bottom cover that includes cable retention clips for the USB hub. Mounting plate for item 100500 to be used with ET5X cradles .
-
Out of stockHino 200/300 Angled Mount - Commercial Mounting Platform with strong steel construction and includes mount. Does not include Device holder.
-
Out of stockThis is a custom made holder for the COGNEX MX-1000/MX-1502 that keeps your device in an upright position for better viewing. Easily slide your device in/out of the holder. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, or pedestal mounts. - Custom fit to your bare device - Combine with a ProClip vehicle mount to make a full mounting solution
-
Zebra DS3600 Scanner Mount with Vibration Damper. This is a high quality custom made cradle with a neat and discreet design. Easily slide your device in & out of the cradle. No more fumbling around for your device. The industry standard AMPS hole pattern allows easy attachment to any flat surface or ProClip mount. The preinstalled vibration damper softens vibrations caused by machinery or rough terrain.
-
Out of stockZebra MC9200 Standard Cradle custom fit for a bare device. It keeps your device in an upright position for better viewing and reception. Easily slide your device in/out of the holder. Provides for safer driving when viewing, accessing and operating your device in your vehicle. The cradle comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, pedestal mounts or handlebar mounts.
-
Out of stockCradle with Tilt-Swivel. Custom Fit For: Zebra MC9500 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
