Accessories
Original price was: $19.99.$17.11Current price is: $17.11.
2 Pack of M4 x 6mm Screws
Original price was: $9.99.$8.55Current price is: $8.55.
ModTek Hard Case Screw Kit 10 Pack of M3 x 12mm Thread Forming Screws for ModTek Hard Case
Original price was: $224.99.$192.66Current price is: $192.66.
43" Floor Stand with AMPS Plate, Hollow 34" section with cable path (0.6 In / 15mm inner diameter), 10" Flex arm 360 degree flexibility, 12" base plate
Original price was: $44.99.$39.76Current price is: $39.76.
Aluminum AMPS Plate for Crown Pipe Clamp
Original price was: $34.99.$29.96Current price is: $29.96.
Forklift Clamp Fastener Pack M8 Fasteners and Coupling Nuts for Clamp.M4 Fasteners for attaching Pedestal.
Original price was: $119.99.$106.06Current price is: $106.06.
Standard-Duty Forklift Mount, Extra Durable, 6.55 Inch Arm, 3.75 x 5.125 Inch Clamp with Steel 20mm Ball AMPS Plates
Original price was: $384.99.$329.69Current price is: $329.69.
Forklift Mount Kit Forklift Clamp 3.375 x 5.125 Keyboard and Tablet Mount Plate AMPS and VESA 75/100
Original price was: $144.99.$124.16Current price is: $124.16.
Perfect for use with all types of forklifts. Attach a custom ProClip device holder directly to the face plate or add a ProClip Mount for even more flexibility. - Works perfectly on the roll bar of a forklift - The forklift mount can be mounted on square surfaces - Multiple sets of AMPS holes makes the fitting of a ProClip mount base easy - Comes with complete set of screws in various sizes, allowing for the forklift mount to span from 130mm to 5mm
Original price was: $309.99.$265.45Current price is: $265.45.
Heavy-Duty Forklift Mount, 4 Inch Arm, 3.375 x 5.125 Inch Clamp. Perfect for use with all types of forklifts. Attach a device holder to the included arm and you are all set to go. - Solid-core aluminum for exceptional strength - The forklift mount can be mounted on square surfaces, perfect for forklift cages
Original price was: $314.99.$269.74Current price is: $269.74.
Heavy-Duty Forklift Mount, 6 Inch Arm, 3.375 x 5.125 Inch Clamp. Perfect for use with all types of forklifts. Attach a device holder to the included arm and you are all set to go. - Solid-core aluminum for exceptional strength - The forklift mount can be mounted on square surfaces, perfect for forklift cages
Original price was: $314.99.$269.74Current price is: $269.74.
Heavy-Duty Forklift Mount, 10 Inch Arm, 3.375 x 5.125 Inch Clamp. Perfect for use with all types of forklifts. Attach a device holder to the included arm and you are all set to go. - Solid-core aluminum for exceptional strength - The forklift mount can be mounted on square surfaces, perfect for forklift cages
Original price was: $319.99.$274.03Current price is: $274.03.
Heavy-Duty Forklift Mount, 10 Inch Arm, 3.375 x 5.125 Inch Clamp. Perfect for use with all types of forklifts. Attach a device holder to the included arm and you are all set to go. - Solid-core aluminum for exceptional strength - The forklift mount can be mounted on square surfaces, perfect for forklift cages
Original price was: $164.99.$141.29Current price is: $141.29.
Standard Duty Forklift Mount, 5 Inch Arm, 2.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 5 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
Original price was: $164.99.$141.29Current price is: $141.29.
Standard Duty Forklift Mount, 6 Inch Arm, 2.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 6 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
Original price was: $164.99.$141.29Current price is: $141.29.
Standard Duty Forklift Mount, 5 Inch Arm, 3.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 5 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
Original price was: $164.99.$141.29Current price is: $141.29.
Standard Duty Forklift Mount, 6 Inch Arm, 3.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 6 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
Original price was: $339.99.$291.15Current price is: $291.15.
Heavy-Duty Forklift Mount, 6 Inch Arm, 5 x 5.125 Inch Clamp 90 DEGREE OFFSET 6 INCH PEDESTAL MOUNT HD (Rnd Base Large Teeth, Rnd Base Small Teeth, Wing Nuts)
Original price was: $399.99.$342.53Current price is: $342.53.
Heavy-Duty Forklift Clamp Mount 3.375" x 5.125"; 7.4" Arm with 360 Degree Swivel (Rnd Base Small Teeth, Rnd Base Small Teeth, Wing Nuts and Lock Nuts)
Original price was: $424.99.$363.94Current price is: $363.94.
Heavy-Duty Forklift Clamp Mount 5" x 5.125" 7.4" Arm with 360 Degree Swivel (Rnd Base Small Teeth, Rnd Base Small Teeth, Wing Nuts and Lock Nuts)
Original price was: $29.99.$25.68Current price is: $25.68.
Extension Plate Fits all 7xx267 8.3"/8.4" Cradles Zebra ET50/51/55/56 8.3" and 8.4"
Original price was: $354.99.$303.99Current price is: $303.99.
Folding Keyboard and Tablet Mount AMPS, VESA 75/100, Keyboard Support Tension Hinge, Offset Mount Points
Original price was: $109.99.$94.19Current price is: $94.19.
Standard-Duty Forklift Clamp Mount, AMPS, No Arm, 3.375 x 5.125 Inch Clamp
Original price was: $79.99.$68.50Current price is: $68.50.
Aluminum AMPS Adapter Plate for Crown Forklift Pipe Mount
Original price was: $369.99.$316.84Current price is: $316.84.
PEDESTAL MOUNT KIT 6 INCH WITH SWIVEL HEAD (Pre-assebled with 4 inch Circular Plate, 6 Inch Pedestal Mount, Swivel Head, Locking Move Clip Heavy Duty Female Plate)
Original price was: $129.99.$114.91Current price is: $114.91.
This 4 inch aluminum Mount has teeth within the interlocking joints providing a very strong connection. It can be used in a variety of vehicles or fixed locations to mount a wide variety of products such as tablets and mobile computers. - These come in 2, 4, 6, 8 and 10 heights with and AMPS base and top and can be purchased in complete sets or as individual pieces. - The design allows you to mix and match the parts to create your own unique design/solution.
Original price was: $134.99.$119.34Current price is: $119.34.
This 6 inch aluminum Mount has teeth within the interlocking joints providing a very strong connection. It can be used in a variety of vehicles or fixed locations to mount a wide variety of products such as tablets and mobile computers. - These come in 2, 4, 6, 8 and 10 heights with and AMPS base and top and can be purchased in complete sets or as individual pieces. - The design allows you to mix and match the parts to create your own unique design/solution.
Original price was: $144.99.$128.18Current price is: $128.18.
Super-Duty Pedestal Mount with Square Bases - 10" Length
Original price was: $69.99.$59.93Current price is: $59.93.
Angled Top Part - 60 Degrees Angles the top part of the Pedestal Fits both Solid Core and Hollow Core Pedestals Dual AMPS-hole patterns for mounting of a device holder
Original price was: $89.99.$77.06Current price is: $77.06.
Precision machined from solid core aluminum rod, this Heavy-Duty Extension Rod provides the means to lengthen or customize your ProClip Heavy-Duty Mount and includes bolt and wingnut. - The teeth machined into the joints at each end of the rod are specifically compatible with our Heavy-Duty mounts. The interlocking joint design adjusts incrementally by 11.25 degrees. - Compatible with all ProClip Heavy-Duty Mounts - Available in 2, 4, 6 and 8 Inch Lengths
Original price was: $74.99.$64.21Current price is: $64.21.
Precision machined from solid core aluminum rod, this Heavy-Duty Extension Rod provides the means to lengthen or customize your ProClip Heavy-Duty Mount and includes bolt and wingnut. - The teeth machined into the joints at each end of the rod are specifically compatible with our Heavy-Duty mounts. The interlocking joint design adjusts incrementally by 11.25 degrees. - Compatible with all ProClip Heavy-Duty Mounts - Available in 2, 4, 6 and 8 Inch Lengths
