-
Out of stockCharging Cradle with Cigarette Lighter Adapter - Custom Fit For: Zebra MC70 and MC75 - Custom fit to your bare device - Includes tilt-swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Works with Standard and Extended batteries.
-
Out of stockCharging Cradle for Hard-Wired Installation - Custom Fit For: Zebra MC70 and MC75 - Custom fit to your bare device - Includes tilt-swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Works with Standard and Extended batteries.
-
Out of stockAMPS Mount Kit 4 - M6 x 12mm Fasteners, Split Lock Washers M4 Universal Fastener Pack Zebra VC80, VC80x, VC8300
-
This tablet cradle is designed to fit the Zebra L10 tablet in both the XSLate and XPad format. The key lock will slide through the handle of the Xpad version or over the top of the XSlate and provide a secure hold for the device. - This cradle doesn't block the rear facing camera. - The cradle is designed to fit the Zebra xDIM V3 module to add power and USB ports as needed for external accessories such as RFID readers or bar code scanners. - Includes AMPS and VESA 75 mounting hole patterns.
-
Vehicle Cradle for Zebra ET51 8.4" with Integrated Barcode Scanner
-
Out of stockVehicle Cradle with Key Lock for Zebra ET51 8.4" with Integrated Barcode Scanner
-
Out of stockSpring Lock Module Zebra ET50/51/55/56 Cradles Supports 8.3, 8.4"" and 10.1"" Sizes Part Number Series 7xx266 and 7xx267
-
Out of stockKey Lock Module Zebra ET50/51/55/56 Cradles Supports 8.3, 8.4 and 10.1 Sizes Part Number Series 7xx266 and 7xx267
-
Out of stockCharging Block with USB-A Host Supports 8.3, 8.4 and 10.1 Sizes Part Number Series 7xx266 and 7xx267
-
Out of stockUSB Ethernet Hub Kit for ET50 Cradles USB-A Hub with 10/100/1000 Ethernet Cover with Cable Retention Replacement M5 x 16mm Screws
-
Out of stockKey Lock Module Zebra ET40/ET45 8" and 10" (Bare Tablet)
-
Out of stockSpring Lock Module Zebra ET40/ET45 8" and 10" (Bare Tablet)
-
Out of stockCharging Block and Hard-Wired Power Supply Zebra ET40/ET45 8" and 10" (Bare Tablet)
-
Out of stockCharging Block, USB-A Host and Hard-Wired Power Supply Zebra ET40/ET45 8" and 10" (Bare Tablet)
-
Out of stockKey Lock Module Zebra ET40/ET45 8" and 10" (with Rugged Boot)
-
Out of stockSpring Lock Module Zebra ET40/ET45 8" and 10" (with Rugged Boot)
-
Out of stockCharging Block, Hard-Wired Power SupplyZebra ET40/ET45 8" and 10" (with Rugged Boot)
-
Out of stockCharging Block, USB-A Host and Hard-Wired Power Supply Zebra ET40/ET45 8" and 10" (with Rugged Boot)
-
Out of stockSingle Slot Desktop Charging Dock Zebra ET40/ET45 8" and 10" With or Without Rugged Boot
-
Out of stockCharging Cradle, Key Lock, USB-A Host Does Not Include Power Supply Zebra ET40/ET45 10" (with Rugged Boot)
-
Out of stockCigarette Lighter Adapter (Cig Plug) Power Supply 12-24V Input 12V 3A Output 6-PIn Molex Cable
-
Out of stockCharging Cradle, 6-Pin Molex Pigtail No Power Supply (12V) Zebra ET40/ET45 8" (Bare Tablet)
-
This cradle is custom fit to the Zebra ET5x 8.3 bare tablet - This cradle is machined from ABS and Acetal polymers and features AMPS and 75mm VESA hole patterns for easy attachment to vehicles, work carts or flat surfaces. - Custom fit to bare tablet - Does not angle or rotate; providing a solid mounting platform - Recommended with ProClip mounts and pedestals.
-
Out of stockThis cradle is custom fit to the Zebra ET5x 10.1 bare tablet - This cradle is machined from ABS and Acetal polymers and features AMPS and 75mm VESA hole patterns for easy attachment to vehicles, work carts or flat surfaces. - Custom fit to bare tablet - Does not angle or rotate; providing a solid mounting platform - Recommended with ProClip mounts and pedestals.
-
Cradle for ET5X 8.3, Frame, X-Back without Scanner. Fits the Zebra ET5x 8.3 Tablet in the Rugged Frame with the 30-Pin Connector installed - Accommodates Expansion Back modules with scanners and batteries (Can not scan while docked).
-
This cradle is custom fit to the Zebra ET5x 8.3 bare tablet. - Key locking - Does not angle or rotate; providing a solid mounting platform - Recommended with ProClip mounts and pedestals. - All cradles are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone. - NOT FOR USE WITH FORKLIFTS
-
Out of stockThis cradle is custom fit to the Zebra ET5x 10.1 bare tablet. - Key locking - Does not angle or rotate; providing a solid mounting platform - Recommended with ProClip mounts and pedestals. - All cradles are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone. - NOT FOR USE WITH FORKLIFTS
-
This cradle is custom fit to the Zebra ET5x 10.1" tablet with the Rugged Frame and the 30-pin connector and includes Key Lock. APPROVED FOR FORKLIFT INSTALLATIONS. Reinforced Acetal Corner Bumpers. Key Locking. USB 3.0 Port for attaching peripherals. AMPS and VESA 75MM Mounting Holes. Recommended with ProClip standard-duty or heavy-duty forklift mounts.
-
Charging Cradle for ET5X 8.3, Frame, X-Back, Key Lock, USB, Scanner Window. Fits the Zebra ET5x 8.3" Tablet in the Rugged Frame with the 30-Pin Connector installed. Reinforced Acetal Corner Bumpers. Scan Window - Enables scanning while the tablet is docked. Key Locking. USB 3.0 Port for attaching peripherals. AMPS and VESA 75MM Mounting Holes. Recommended with ProClip standard-duty or heavy-duty forklift mounts.
-
Out of stockCharging Cradle for ET5X 8.3 in Frame; Key Lock, USB. APPROVED FOR FORKLIFT INSTALLATIONS. Fits the Zebra ET5x 8.3" Tablet in the Rugged Frame with the 30-Pin Connector installed. Reinforced Acetal Corner Bumpers. USB 3.0 Port for attaching peripherals. AMPS and VESA 75MM Mounting Holes. Recommended with ProClip standard-duty or heavy-duty forklift mounts.
-
Heavy Duty Charging Cradle for ET5X 8.3, Frame, X-Back; Key Lock, USB - APPROVED FOR FORKLIFT INSTALLATIONS - Fits the Zebra ET5x 8.3 Tablet in the Rugged Frame with the 30-Pin Connector installed - Reinforced Acetal Corner Bumpers - Accommodates Scanner Module (Can not scan while docked) - USB 3.0 Port for attaching peripherals - AMPS and VESA 75MM Mounting Holes - Recommended with ProClip standard-duty or heavy-duty forklift mounts.
-
Out of stockHolder for Zebra ET51 8.4" with Integrated Barcode Scanner
-
Out of stockNon-Charging Cradle Requires Rugged Frame Supports Expansion Back Scanner Accessible While Docked Hot-Swap Battery Access While Docked Zebra ET50/51/55/56 10.1
-
Out of stockNon-Charging Cradle Requires Rugged Frame Supports Expansion Back Scanner Accessible While Docked Hot-Swap Battery Access While Docked Zebra ET50/51/55/56 8.3"" and 8.4
-
Out of stockNon-Charging Cradle Zebra ET40/ET45 8" (Bare Tablet)
-
Out of stockNon-Charging Cradle Zebra ET40/ET45 8" (with Rugged Boot)
