-
This base will give the stability needed to use the mount as part of a free-standing solution. This also for a more portable mount setup which can be easily moved but is still strong and sturdy. - Round base is 200 mm in diameter (7.9 in) - Supports heavy devices
-
Out of stockExtension plate allows a MSR device holder to be added to the ET5X with rugged frame Pre-drilled AMPS hole pattern Made from durable ABS plastic
-
Out of stockThe VESA ProClip adapter plate attaches to any existing 75mm and 100mm VESA mounting system to create a new flat mounting surface to allow the attachment of ProClip specific mounts and other mounts/devices. Attach to 75mm and 100mm existing VESA systems. Made in Sweden from Durable Machined Aluminum. 4 - Pre-drilled 4mm threaded AMPS pattern holes to easily attach ProClip products
-
The VESA ProClip adapter plate attaches to any existing VESA 75mm or 100mm mounting system. Use to create a new recessed mounting surface to allow the attachment of ProClip specific holders. 4 pre-drilled AMPS pattern pilot holes to attach ProClip holders more securely. 5 mm Diameter Holes accommodate up to M5 screws
-
Out of stockThis Extension Plate has pre-drilled holes for the AMPS hole pattern. This allows additional holders to be added to existing mounts. It features up to 5 positions in either portrait or landscape orientation. Additional holes allow for cables to be run through the plate for a clean installation. Extension plate allows an additional device holder to be added. Multiple Locations for AMPS hole pattern mounts. Made from durable steel. 11.8 in (30 cm) x 2.36 in (6 cm) x .12 in (3 mm)
-
Out of stockWhen attaching a ProClip device holder or Mount to a vehicle dashboard or other surface which lacks sufficient structural integrity to provide a stable mounting platform, we recommend the use of of our Reinforcement Plates for added stability and durability. - Simply drill the properly located AMPS hole pattern in your mounting surface, position the plate on the back side of the mounting surface. - Includes: Four M4 screws (20mm thread length) and lock washers
-
Out of stockThis Vibration Damper effectively reduces the shock and vibration transferred to your mobile computing device mounted in particularly demanding environments such as on heavy machinery or forklifts. Simply install the damper (using the included hardeware) between your mobile device holder/cradle and the mounting bracket or Arm that is attached directly to the vehicle or machinery. The machine screws will engage securely with the M4 threaded steel core within the rubber grommets. - Reduce vibration in your mounted device - Supports standard AMPS hole pattern - High density rubber grommets - Maximum supported weight: 1.5 kg (3.31 lbs)
-
Out of stockBLUEBIRD EFR500 Top Support Charging Holder with Cigarette Lighter Plug. This charging holder is a cradle style mount custom made for a perfect fit with your device. It has a dock connector for easy connection of the device to the holder and a coiled power cord with a cigarette lighter plug for connection to a power outlet in the vehicle. The Holder angles 15 degrees for optimal viewing and can swivel 360 degrees.
-
Out of stockTop Support Charging Holder with USB Cigarette Lighter Plug. Custom fit to your Bluebird Pidion EF500R. Includes Tilt-Swivel to allow holder to angle 15 degrees in any direction and portrait and landscape view. Charging cable permanently attached to holder. Coiled cord length is 19 inch / 49 cm. Stretched cord length is 55 inch / 139 cm. Provides up to 10 Watts (2.1A) charging power. Works in 12 / 24 V vehicle power outlets. Power plug converts from 12/24V to 5.4V output. LED illuminated power indicator
-
Out of stockCharging Holder for Hard-Wired Installation. Custom Fit For: CipherLab CP60. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view
-
Out of stockThis Holder is made to fit the Microsoft Surface Pro 3 tablet without a case. It is a high quality custom made holder with a neat and discreet design. Easily snap your device in and out of the holder.
-
Out of stockSurface Pro 3 Key Lock Holder for UAG case. Custom Fit For: Microsoft Surface Pro 3. Custom fit to your device with UAG case. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Combine with a ProClip vehicle mount for a full mounting solution. ONLY for Surface Pro 3 with UAG Scout or UAG Rogue case. All holders are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone.
