-
Out of stockPRINTER MOUNT PLATE - Zebra QLN 220/320 : ZQ610/620.This printer mount offers an easy and secure way to mount your Zebra printer. The printer mount plate allows for mounting to any APS compatible mount easy mounting to any flat surface while raising the printer for ease of use. Plate COMES WITH PKG OF (2) MOUNTING SCREWS #SK651. Pre-drilled holes for AMPS hole pattern for direct attachment to a mount. - Brass inserts for threaded mounting to an AMPS compatible mount.
-
Out of stockProClip Small Universal Tablet Holder for use with a case Item: 511625 Fits most 7 - 10 inch tablets with a protective case like the OtterBox Easily slide device in and out of holder with spring action corner Includes Tilt-Swivel to angle holder 15 degrees any direction Width adjustment 185 - 245 mm (7.25 - 9.6 in) Height adjustment 108 - 173 mm (4.25 - 6.8 in)
-
Out of stockStandard Holder (for Device without Zebra Rugged Boot) Custom Fit For: Zebra TC51/52/56/57
-
Out of stockLG G Pad F2 8.0 Standard Holder: Custom fit to your bare device Includes tilt-swivel to angle holder 15 degrees any direction Rotate between portrait and landscape view
-
Out of stockCHARGING HOLDER WITH TILT SWIVEL AND USB ON-THE-GO CABLE. FOR HARD WIRE INSTALLATION Zebra TC51 TC52 TC56 TC57
-
Out of stockPerfect for installing any equipment that needs to be turned for use from different directions to be seen by multiple users. Swivels 340 degrees. AMPS hole pattern to attach any ProClip device holder onto.
-
Out of stockThis 4 inch Pedestal Mount Kit creates an extra sturdy and secure mounting platform that can be used in a variety of vehicles and fixed locations like retail stores, kiosks, gyms, conference rooms, trade shows etc. The Pedestal Mount Kit come in 4 inches high with 100mm round base and AMPS top. The design allows you to mix and match the parts, or combine complete sets with loose parts to create your own unique design/solution. The base and the rods can be angled in steps of 24 degrees.
-
Out of stock45 degree Angled Top part to mount a device holder onto. Fits all ProClip pedestals. The top has four holes for mounting onto the top part of a Pedestal Mount. It has dual AMPS-holes for mounting of holder for unit.
-
Out of stockThis 6.5 inch Pedestal Mount is very strong yet light weight. It is designed for a discreet cable entry, where the cable is passed through the Pedestal Mount. The pedestal top swivels 340 degrees. You can easily combined the Pedestal Mount with an angled top part. It has a 6 hole base for attaching to any flat surface or one of our Round Mounting Plates for additional strength.
-
Out of stockThis 4.5 inch Pedestal Mount is very strong yet light weight. The pedestal top swivels 340 degrees. It has a 6 hole base for attaching to any flat surface or one of our Round Mounting Plates for additional strength. Head is angled 15 degrees for easy device viewing
-
Out of stockThis 4.5 inch Pedestal Mount is very strong yet light weight. The pedestal top swivels 340 degrees. It has a 6 hole base for attaching to any flat surface or one of our Round Mounting Plates for additional strength. Head is angled 30 degrees for easy device viewing
-
Out of stockThis 4.5 inch Pedestal Mount is very strong yet light weight. The pedestal top swivels 340 degrees. It has a 6 hole base for attaching to any flat surface or one of our Round Mounting Plates for additional strength. Head is angled 45 degrees for easy device viewing
-
Out of stockThis 4.5 inch Pedestal Mount is very strong yet light weight. The pedestal top swivels 340 degrees. It has a 6 hole base for attaching to any flat surface or one of our Round Mounting Plates for additional strength. Head is angled 60 degrees for easy device viewing
-
Out of stockThis 4.5 inch Pedestal Mount is very strong yet light weight. The pedestal top swivels 340 degrees. It has a 6 hole base for attaching to any flat surface or one of our Round Mounting Plates for additional strength. Head is angled 75 degrees for easy device viewing
-
Out of stockThis 4.5 inch Pedestal Mount is very strong yet light weight. The pedestal top swivels 340 degrees. It has a 6 hole base for attaching to any flat surface or one of our Round Mounting Plates for additional strength. Head is angled 90 degrees for easy device viewing
-
Out of stockUSB Strain Relief Clamp Piece for Bottom Cover for ET5X Charging Cradles
-
Out of stockUSB-C/A Wall Charger 18W USB-C Port Featuring Power Delivery 3.0 12W USB-A for Charging
-
Out of stock10 Inch Extension for Universal Pedestals
-
Out of stock6 Pin Molex to USB A Cable (300 cm / 9 feet long)
-
Out of stockHardwire Power Supply with Dual USB Ports and 2-Pin Molex Cable Input 12/24V to 2 Pin Molex Port. Output Port 1: 5.25 V, 2.4 A, Output Port 2: Qualcomm quick charge 6V/3A 9V/2A, 12V 1.5A
-
Out of stockDC Step Down Converter with 6 ft. Barrel Jack Cable Input 48V Nominal: (33.6V to 60V Input Voltage) Output: 12V 3 Amps Continuous (Alfatronix P/N: DDi48-12 036-B) Cable Barrel Jack is 5.5mm OD
-
Out of stockAC Power Supply, 5 Cable, 100-240V, 1.3A Input, 12V, 3.0A Output, Int l Adapters Included
-
Out of stockAC Wall Power Supply with 6-Pin Molex Adapter 110-240V 1.3A AC Input 12V 3A DC Output Interchangeable Wall Plugs 5 Foot Cable
-
Out of stockHard-Wired Power Supply 12-48V Input 12V 3A Output (IP1339 charging box with 2-PIn Molex Cable IP811 and 6-Pin Molex 12V Output Cable IP1341)
-
Out of stockHARDWIRE POWER SUPPLY 24/12V TO 5V, 2A (IP841 charging box with Molex to Molex Pig Tail and 2 Pin Molex cable to fixed power source with red fuse holder)
-
Out of stockProClip Cigarette Lighter Charger 6 Pin Molex Connector 12/24V to 5.4V 2.7A
-
Out of stockQuick Release Dock, 45mm Release Lever, Tilt-Swivel and Hard-Wired Power Supply
-
Out of stockET50 Charging PCBA with USB Port Direct and Tablet Provided 5V Power Fits All Zebra ET50 Charging Cradles
-
Barrel plug fits matching socket on ET5X series charging holders - Output: 12 volt 4.16 amp. AC power cord for use with ET50 and ET55 holders. Provides power to charge tablet via US 110v outlets.
-
For installation into vehicle power supply - Works with forklifts and other vehicles that use up to 48 volt direct current (VDC) power systems - Input Voltage Tolerance of up to 60 VDC - Converts 60V, 48V, 36V, 24V, and 18V systems to 12V - 36W continuous output. Go to our website at https://www.proclipusa.com/product/48v-to-12v-power-converter?sSearch=71 0872 for complete specifications
-
Out of stock711168,, iPad 10.2 Standard Holder,, HOLDER WITH TILT-SWIVEL iPad 10.2 (7th gen 2019)
-
Out of stockCharging Holder with Tilt-Swivel and Cigarette Lighter Adapter for Janam XT3
