-
Heavy Duty Swivel Mount - Round Bases, #1 Heavy Duty Pedestal Teeth, #2 Heavy Duty Pedestal Teeth, 4MM Slots (Fits M4 Fasteners)
-
Out of stockHeavy Duty Swivel Mount - Round Bases, #1 Heavy Duty Pedestal Teeth, #2 Heavy Duty Pedestal Teeth, 5MM Slots (Fits M5 Fasteners)
-
Heavy Duty Swivel, #1 Heavy Duty Pedestal Teeth, #2 Heavy Duty Pedestal Teeth, Does not include base plates.
-
Adapts the VC80, VC80x back hole pattern to industry standard AMPS. Threaded for M4 screws. Recessed for flush mounting
-
Out of stockCFLD Shifting Plate for Oracle Micros POS Terminal
-
Out of stockScanner Bracket for Oracle Micros POS - MOQ - 25 Units
-
Out of stockPosition your device higher or lower on the mount. The Vertical Extension Plate attaches to the ProClip Dashboard Mount or directly to a flat surface. Extension plates may not line up with the pre-drilled holes on your ProClip mount. The included self-tapping screws can be used to screw anywhere into the mount face.
-
Out of stockStandard Left/Right Extension Plate. 100 x 50 x 5 mm (3.94 x 1.97 x 0.20 in). Avoid interference with the dashboard controls/displays when using wide devices. To extend your device to the left or right from the Vehicle Mount (especially the ProClip Angled Mount) to avoid interference with the dashboard controls/displays. Extension plates may not line up with the pre-drilled holes on your ProClip mount. The included self-tapping screws can be used to screw anywhere into the mount face.
-
Out of stockThis Pedestal Mount Round Mounting Plate creates an extra sturdy and secure mounting platform that can be used in aircrafts, boats and a variety of vehicles e.g. personal vehicles, commercial vehicles, emergency vehicles, police vehicles, trucks, tractors, fork lifts and RVs. Additionally, the Pedestal Mount Extension Rod can be used with mounts in retail stores, kiosks, gyms, conference rooms, trade shows etc.
-
Out of stockThis 6 inch aluminum Mount has teeth within the interlocking joints providing a very strong connection. It can be used in a variety of vehicles or fixed locations to mount a wide variety of products such as tablets and mobile computers. - These come in 2, 4, 6, 8 and 10 heights with and AMPS base and top and can be purchased in complete sets or as individual pieces. - The design allows you to mix and match the parts to create your own unique design/solution.
-
Out of stockThe VESA ProClip adapter plate attaches to any existing 75mm and 100mm VESA mounting system to create a new flat mounting surface to allow the attachment of ProClip specific mounts and other mounts/devices.
-
This base will give the stability needed to use the mount as part of a free-standing solution. This also for a more portable mount setup which can be easily moved but is still strong and sturdy. - Round base is 200 mm in diameter (7.9 in) - Supports heavy devices
-
Out of stockExtension plate allows a MSR device holder to be added to the ET5X with rugged frame Pre-drilled AMPS hole pattern Made from durable ABS plastic
-
Out of stockThe VESA ProClip adapter plate attaches to any existing 75mm and 100mm VESA mounting system to create a new flat mounting surface to allow the attachment of ProClip specific mounts and other mounts/devices. Attach to 75mm and 100mm existing VESA systems. Made in Sweden from Durable Machined Aluminum. 4 - Pre-drilled 4mm threaded AMPS pattern holes to easily attach ProClip products
-
The VESA ProClip adapter plate attaches to any existing VESA 75mm or 100mm mounting system. Use to create a new recessed mounting surface to allow the attachment of ProClip specific holders. 4 pre-drilled AMPS pattern pilot holes to attach ProClip holders more securely. 5 mm Diameter Holes accommodate up to M5 screws
-
Out of stockThis Extension Plate has pre-drilled holes for the AMPS hole pattern. This allows additional holders to be added to existing mounts. It features up to 5 positions in either portrait or landscape orientation. Additional holes allow for cables to be run through the plate for a clean installation. Extension plate allows an additional device holder to be added. Multiple Locations for AMPS hole pattern mounts. Made from durable steel. 11.8 in (30 cm) x 2.36 in (6 cm) x .12 in (3 mm)
-
Out of stockWhen attaching a ProClip device holder or Mount to a vehicle dashboard or other surface which lacks sufficient structural integrity to provide a stable mounting platform, we recommend the use of of our Reinforcement Plates for added stability and durability. - Simply drill the properly located AMPS hole pattern in your mounting surface, position the plate on the back side of the mounting surface. - Includes: Four M4 screws (20mm thread length) and lock washers
-
Out of stockThis Vibration Damper effectively reduces the shock and vibration transferred to your mobile computing device mounted in particularly demanding environments such as on heavy machinery or forklifts. Simply install the damper (using the included hardeware) between your mobile device holder/cradle and the mounting bracket or Arm that is attached directly to the vehicle or machinery. The machine screws will engage securely with the M4 threaded steel core within the rubber grommets. - Reduce vibration in your mounted device - Supports standard AMPS hole pattern - High density rubber grommets - Maximum supported weight: 1.5 kg (3.31 lbs)
-
Out of stockBLUEBIRD EFR500 Top Support Charging Holder with Cigarette Lighter Plug. This charging holder is a cradle style mount custom made for a perfect fit with your device. It has a dock connector for easy connection of the device to the holder and a coiled power cord with a cigarette lighter plug for connection to a power outlet in the vehicle. The Holder angles 15 degrees for optimal viewing and can swivel 360 degrees.
-
Out of stockTop Support Charging Holder with USB Cigarette Lighter Plug. Custom fit to your Bluebird Pidion EF500R. Includes Tilt-Swivel to allow holder to angle 15 degrees in any direction and portrait and landscape view. Charging cable permanently attached to holder. Coiled cord length is 19 inch / 49 cm. Stretched cord length is 55 inch / 139 cm. Provides up to 10 Watts (2.1A) charging power. Works in 12 / 24 V vehicle power outlets. Power plug converts from 12/24V to 5.4V output. LED illuminated power indicator
-
Out of stockCharging Holder for Hard-Wired Installation. Custom Fit For: CipherLab CP60. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view
-
Out of stockThis Holder is made to fit the Microsoft Surface Pro 3 tablet without a case. It is a high quality custom made holder with a neat and discreet design. Easily snap your device in and out of the holder.
-
Out of stockSurface Pro 3 Key Lock Holder for UAG case. Custom Fit For: Microsoft Surface Pro 3. Custom fit to your device with UAG case. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Combine with a ProClip vehicle mount for a full mounting solution. ONLY for Surface Pro 3 with UAG Scout or UAG Rogue case. All holders are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone.
-
Out of stockCustom fit for Microsoft Surface Go and Surface Go 2 bare device. Built in clip to hold the Surface Pen. Key lock for security of tablet.
-
Out of stockApple iPad (7th Gen) Forklift Kit with OtterBox uniVERSE
-
Out of stockRUNNUR - OtterBox Tablet Belt Clip - Apple iPad Mini 5th Gen - WITH CASE
-
Out of stockMultiStand for Apple iPad Mini with Retina display. This Holder is made to fit the tablet without a case. Easily snap your device in and out of the holder. Provides for safer driving when viewing, accessing and operating your device in the vehicle. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Combine with a ProClip vehicle mount to make a full mounting solution
-
Out of stockStandard Holder iPad 10.2 (7th Gen 2019) iPad 10.2 (8th Gen 2020) Fits OtterBox Defender Case
-
Out of stockCharging Holder with Dual USB Hard-Wired Power Supply iPad 10.2 (7th Gen 2019) iPad 10.2 (8th Gen 2020) Fits OtterBox Defender Case
-
Out of stockCustom fit to your bare device - iPad 2,3 and 4. Easily slide device in and out of holder - Includes Tilt-Swivel to angle holder 15 degrees. - Rotate between portrait and landscape view. This is a special order item. Please allow an additional 2-3 week lead time. - Due to the size of the iPad it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the iPad will fit in that location.
-
Out of stockADJUSTABLE HOLDER iPhone for rugged cases
-
Out of stockCHARGING HOLDER WITH TILT SWIVEL AND USB CIGARETTE LIGHTER PLUG Apple iPad mini 4 / iPad mini (5th Gen 2019)
-
Out of stockCharging Holder for Hard-Wired Installation. Custom fit to your bare device iPad 9.7 (5th Gen 2017 & 6th Gen 2018) and iPad Air. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Due to the size of the iPad it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the iPad will fit in that location.
-
Out of stockCHARGING HOLDER WITH KEY LOCK, TILT SWIVEL HARD WIRED INSTALLATION iPad 9.7 (2018) iPad 9.7 (2017) iPad Air
-
Out of stockThis Holder is made to fit the iPad Air 2 tablet with OtterBox Defender case and includes Key Lock.
