-
Out of stockThis Tilt-Swivel is made for use with holders for heavier devices e.g. Tablets, Mobile Computing devices, Bar Code Scanners, Two-way Radios etc. Tilt, swivel and/or extend your holder/device for a better viewing position. It tilts approx. 15 degrees, swivels 360 degrees and extends 1 inch/ 2.54 cm. The Base plate has AMPS hole pattern and the face plate has several hole patterns including AMPS to accommodate most holders, cradles, mounts and car kits.
-
Out of stockPerfect for use on square posts. Attach a Device holder for your device to the face plate and you are all set to go. Fits bars and square posts that are 45-50mm wide. Very strong construction. Supports heavy devices. Provides a firm installation
-
Out of stockPerfect for use on square posts. Attach a Device holder for your device to the face plate and you are all set to go. Fits bars and square posts that are 34 - 40mm wide. Very strong construction. Supports heavy devices. Provides a firm installation
-
Out of stockA pivoting AMPS mounting plate for use with ProClip aluminum mounts. Can be attached to the top of any of our mounts to provide a 180 degree pivot to face either direction. Great for when a device needs to be seen by multiple users. - 180 degree pivoting head for mounting ProClip device holders - AMPS hole pattern on both head and base to allow use with ProClip mounts or any product that uses the AMPS hole pattern - Easily accessible thumb lever allows you to lock pivot in place
-
Out of stockA pivoting AMPS mounting plate for use with ProClip aluminum pedestal mounts. Can be attached to the top of any of our mounts to provide a 180 degree pivot to face either direction. Great for when a device needs to be seen by multiple users.
-
Out of stockUSB Ethernet Hub Kit USB-A Hub with 10/100/1000 Ethernet Cover with Cable Retention Includes Fastener Pack and Zip Ties
-
Out of stockPrinter Mount Kit for Battery Eliminator Includes Quick Release Dock TSC Alpha 30L / 40L
-
Out of stockPrinter Mount Plate for Battery Eliminator TSC Alpha 30L / 40L
-
Out of stockCharging Printer Mount Kit Does not include power supply. TSC Alpha 30L / 40L
-
Out of stockPrinter Mount Plate with Battery Access TSC Alpha 30L / 40L
-
Out of stockPrinter Mount Kit for Battery Access Includes Quick Release Dock TSC Alpha 30L / 40L
-
Out of stockPrinter Mount with Media Roller - Desktop or Forklift
-
OtterBox uniVERSE Adapter for Zebra RFD8500 Sled Fits without Fasteners
-
The Keyboard Mount is designed to be used with the ProClip 3 Way Heavy Duty Swivel Mount with AMPS hole pattern. The Keyboard Mount integrates with a ProClip Tablet Holder to create a keyboard tray for the device in a vehicle. Adjustable keyboard tray with AMPS holes for various keyboards. Can be used with most ProClip tablet holders. Multiple AMPS hole patterns and VESA 75 & 100 for easy mounting.
-
Out of stockMOUNTING BRACKET FOR STARTECH USB-ETHERNET HUB. This item has been revised to include a bottom cover that includes cable retention clips for the USB hub. Mounting plate for item 100500 to be used with ET5X cradles .
-
Out of stockThis is a custom made holder for the COGNEX MX-1000/MX-1502 that keeps your device in an upright position for better viewing. Easily slide your device in/out of the holder. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, or pedestal mounts. - Custom fit to your bare device - Combine with a ProClip vehicle mount to make a full mounting solution
-
Out of stockThis is a custom made holder for the COGNEX MX-1000/MX-1502 that keeps your device in an upright position for better viewing. Easily slide your device in/out of the holder. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, or pedestal mounts. - Custom fit to your bare device - Includes rubber vibration dampers for rough environments
-
Out of stockHolder with Tilt-Swivel for OtterBox Power Bank Fits 78-80642 (20,000 mAh)
-
Out of stockGolf Cart Mount With Quick Release Attachment. Custom made pedestal designed to be attached to the steering column on a golf cart. Pre-installed quick release move clip ensures compatibility with all ProClip device holders. AMPS ring allows you to re-position the angle to ensure optimal placement of your device. Thumb screw allows quick and easy installation and removal without damaging the column. Vertical arm tilts and rotates to allow maximum visibility
-
Out of stockVEHICLE CHARGING HOLDER FOR FIXED INSTALLATION - Motorola CP200 (For use with Li-Ion and Li-Poly batteries)
-
Out of stockHOLDER WITH TILT SWIVEL AND KEY LOCK Microsoft Surface Pro 7 Surface Pro 6 Surface Pro (2017) Surface Pro 4 with pen support
-
Out of stockHolder with Key Lock Surface Pro 4, 5, 6, 7 in UAG Metropolis Case
-
Out of stockHolder with Spring Lock Getac T800 (Fits unit both with and without handstrap. For both standard and SnapBack battery)
-
Out of stockThis Travel Mount Kit is a windshield suction cup mount designed to accommodate the ProClip custom device holders so you can easily bring your device holder when you travel. ProClip Suction Cup Mount Kit with Locking Move Clip - Designed to fit with most ProClip Device Holders (not for tablet holders) Easily move holder between vehicle mount and travel mount - Secure suction cup that will adhere to any smooth non-porous surface - 3M adhesive dash mount disk for dashboard or console attachment
-
Out of stockMagnet Set (2 pcs) for attachment to back of Sleeve.
-
Out of stockCharging Holder, Tilt-Swivel, Pogo Pins and Cigarette Lighter Adapter for Samsung Xcover Pro SM-G715
-
Out of stockCharging Holder, Tilt-Swivel, Pogo Pins and Hard-Wired Power Supply for Samsung Xcover Pro SM-G715
-
Out of stockHolder with Key Lock for Microsoft Surface Pro 8 / Pro 9
-
Out of stockHEADREST MOUNT FOR REAR SEAT ENTERTAINMENT (MEDIUM) Minimum inner distance between headrest posts: 123 mm/ 4.8 inches Maximum outer distance between headrest posts: 183 mm/ 7.2 inches
-
Out of stockFactory Pre-Assembly Included; Tilt Swivel Mounts pre-attached to Dash Mount
