-
Out of stockApple iPad (7th Gen) Forklift Kit with OtterBox uniVERSE
-
Out of stockRUNNUR - OtterBox Tablet Belt Clip - Apple iPad Mini 5th Gen - WITH CASE
-
Out of stockMultiStand for Apple iPad Mini with Retina display. This Holder is made to fit the tablet without a case. Easily snap your device in and out of the holder. Provides for safer driving when viewing, accessing and operating your device in the vehicle. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Combine with a ProClip vehicle mount to make a full mounting solution
-
Out of stockStandard Holder iPad 10.2 (7th Gen 2019) iPad 10.2 (8th Gen 2020) Fits OtterBox Defender Case
-
Out of stockCharging Holder with Dual USB Hard-Wired Power Supply iPad 10.2 (7th Gen 2019) iPad 10.2 (8th Gen 2020) Fits OtterBox Defender Case
-
Out of stockCustom fit to your bare device - iPad 2,3 and 4. Easily slide device in and out of holder - Includes Tilt-Swivel to angle holder 15 degrees. - Rotate between portrait and landscape view. This is a special order item. Please allow an additional 2-3 week lead time. - Due to the size of the iPad it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the iPad will fit in that location.
-
Out of stockADJUSTABLE HOLDER iPhone for rugged cases
-
Out of stockCHARGING HOLDER WITH TILT SWIVEL AND USB CIGARETTE LIGHTER PLUG Apple iPad mini 4 / iPad mini (5th Gen 2019)
-
Out of stockCharging Holder for Hard-Wired Installation. Custom fit to your bare device iPad 9.7 (5th Gen 2017 & 6th Gen 2018) and iPad Air. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Due to the size of the iPad it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the iPad will fit in that location.
-
Out of stockCHARGING HOLDER WITH KEY LOCK, TILT SWIVEL HARD WIRED INSTALLATION iPad 9.7 (2018) iPad 9.7 (2017) iPad Air
-
Out of stockThis Holder is made to fit the iPad Air 2 tablet with OtterBox Defender case and includes Key Lock.
-
Out of stockiPad Spring Lock Charging Holder for Hard-Wired Installation for iPad Pro 12.9 (1st Gen 2015) and iPad Pro 12.9 (2nd Gen 2017) - Due to the size of the iPad it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the iPad will fit in that location.
-
Out of stockiPad Key Lock Tough Sleeve for Hard-Wired Installation. Custom fit to your bare device iPad 9.7 (5th Gen 2017 & 6th Gen 2018) and iPad Air. Key lock for added security. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Tough Sleeves are too heavy for standard ProClip mounts. An extra strength mount or an aluminum pedestal mount is recommended.
-
Out of stockiPad Key Lock Tough Sleeve for Hard-Wired Installation. Custom fit to your bare device iPad Air 2. Key lock for added security. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Tough Sleeves are too heavy for standard ProClip mounts. An extra strength mount or an aluminum pedestal mount is recommended.
-
Out of stockADJUSTABLE HOLDER WITH TILT SWIVEL Apple iPhone 12 12 Pro 13 13 Pro with small to medium sized cases
-
Out of stockCHARGING HOLDER WITH KEY LOCK, TILT SWIVEL HARD WIRED INSTALLATION Apple iPad Pro 11 (2018) iPad Air 4th Gen (2020)
-
Out of stockiPad Key Lock Holder - Custom Fit For: iPad 10.2 (2019) - Custom fit to tablet - Includes Tilt-Swivel to angle holder 15 degrees any direction - Rotate between portrait and landscape view
-
Out of stockCHARGING HOLDER WITH SPRING LOCK, TILT SWIVEL HARD WIRED INSTALLATION Apple iPad Pro 11 (2018) iPad Air 4th Gen (2020)
-
Out of stockCharging Holder with USB Cigarette Lighter Plug. Custom Fit For: Janam XM5. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. USB cable with 12 V power plug included. USB cable permanently attached to holder. Cord length is 39 inch / 99 cm. Works in any 12 V vehicle power outlet. Provides up to 10 Watts (2.1A) charging power. Power plug converts from 12 V to 5 V output. LED illuminated power indicator
-
Out of stockPANASONIC FZ-N1 HOLDER WITH SWIVELING TOP SUPPORT - Custom fit to your bare device - Fits device with standard or extended battery - Fits device with or without handstrap - Rotate between portrait and landscape view - Top support arm keeps device in place even during heavy use
-
Out of stockHOLDER WITH TILT SWIVEL AND KEY LOCK Panasonic FZ- G1
-
Out of stockPANASONIC Key Lock Standard Holder Custom Fit For: Panasonic FZ-B2 & FZ-M1 without a case. Easily slide device in and out of holder - Includes Tilt-Swivel to angle holder 15 degrees any direction - Rotate between portrait and landscape view.
-
Out of stockKey Lock Holder with Cable Attachment. Custom Fit For: Panasonic FZ-B2 & FZ-M1. For Use With or Without Handstrap. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. This is a special order item. Please allow an additional 2-3 week lead time. All holders are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone.
-
Out of stockSpring Lock Standard Holder Custom Fit For: Panasonic FZ-B2 & FZ-M1. Custom fit to your bare device. For Use With or Without Handstrap. Spring lock for quick release of tablet. Custom fit to tablet. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view
-
Out of stockSpring Lock Standard Holder with Cable Attachment. Custom Fit For: Panasonic FZ-B2 & FZ-M1. Spring lock for quick release of tablet. Custom fit to tablet. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view
-
Out of stockStandard Holder Custom Fit For: Panasonic FZ-N1 - Custom fit to your bare device - Includes tilt-swivel to angle holder 15 degrees any direction - Rotate between portrait and landscape view - Fits with Standard or Extended Battery and Handstrap
-
Panasonic FZ-N1 Vehicle Cradle with Cigarette Lighter Adapter - Custom fit to your bare device - Fits device with standard or extended battery - Fits device with or without hand strap - Rotate between portrait and landscape view
-
CHARGING HOLDER WITH TILT SWIVEL AND CIGARETTE LIGHTER PLUG Panasonic FZ-T1
-
Out of stockPanasonic FZ-N1 Vehicle Cradle - Top Support and Cigarette Lighter Adapter - Custom fit to your bare device - Fits device with standard or extended battery - Fits device with or without hand strap - Rotate between portrait and landscape view - Top support arm keeps device in place even during heavy use
-
Out of stockPanasonic FZ-N1 Vehicle Cradle with Cigarette Lighter Adapter - Custom fit to your bare device - Fits device with or without hand strap - Includes Tilt-Swivel to angle holder 15 degrees any direction - Rotate between portrait and landscape - Fits with Standard or Extended Battery and Handstrap
-
Out of stockPanasonic FZ-X1 Vehicle Cradle - Top Support and Cigarette Lighter Adapter - Custom fit to your bare device - Fits device with standard or extended battery - Rotate between portrait and landscape view - Top support arm keeps device in place even during heavy use
-
Out of stockVehicle Cradle with Hard-Wired Power Supply for Panasonic FZ- N1. Custom fit to your bare device - Fits device with standard or extended battery - Fits device with or without hand strap - Rotate between portrait and landscape view
-
Out of stockProclip Panasonic FZ-T1 /holder with Hard-Wire
-
Out of stockVehicle Cradle - USB Port and Hard-Wired Power Supply - Custom Fit For: Panasonic Toughbook L1 (FZ-L1) Bare Device
-
Out of stockPanasonic FZ-N1 Vehicle Cradle - Top Support and Hard-Wired Power Supply - Custom fit to your bare device - Fits device with standard or extended battery - Fits device with or without hand strap - Rotate between portrait and landscape view - Top support arm keeps device in place even during
-
Out of stockVehicle Cradle with Hard-Wired Power Supply for Panasonic FZ- X1
