-
Out of stockThis aluminum 4 inch Mount has teeth within the interlocking joints providing a very strong connection that can withstand a lot of weight. It provides a mounting platform that can be used on a variety of vehicles and fixed locations and can be used to - mount a wide variety of products such as tablets, mobile computers, printers, and mobile phones. - The mounts come in 2 inch, 4 inch, 6 inch, 8 inch, and 10 inch heights with and AMPS base and top.
-
Out of stockPrecision machined from solid core aluminum rod, this Heavy-Duty Extension Rod provides the means to lengthen or customize your ProClip Heavy-Duty Mount and includes bolt and wingnut. - The teeth machined into the joints at each end of the rod are specifically compatible with our Heavy-Duty mounts. The interlocking joint design adjusts incrementally by 11.25 degrees. - Compatible with all ProClip Heavy-Duty Mounts - Available in 2, 4, 6 and 8 Inch Lengths
-
Out of stockPrecision machined from solid core aluminum rod, this Heavy-Duty Extension Rod provides the means to lengthen or customize your ProClip Heavy-Duty Mount and includes bolt and wingnut. - The teeth machined into the joints at each end of the rod are specifically compatible with our Heavy-Duty mounts. The interlocking joint design adjusts incrementally by 11.25 degrees. - Compatible with all ProClip Heavy-Duty Mounts - Available in 2, 4, 6 and 8 Inch Lengths
-
This Round base Mount AMPS Base adds a mounting platform to a Mount Extension Rod. It has holes which accomodate 5mm bolts and offers an AMPS hole pattern for securing device holders and attaching to other surfaces. - The Mount AMPS Base has teeth for interlocking joints providing a very strong connection. It is made of aluminum, a material which provides extremely strong and durable products of low weight.
-
Out of stockThis Square AMPS Base adds a mounting platform to a Mount Extension Rod. It offers an AMPS hole pattern for securing device holders and attaching to other surfaces. - The Mount AMPS Base has teeth for interlocking joints providing a very strong connection. It is made of aluminum, a material which provides extremely strong and durable products of low weight.
-
This 4 inch 90 degree twist Mount has teeth within the interlocking joints providing a very strong connection that can withstand a lot of weight. - The mounts come in 2 inch, 4 inch, 6 inch, 8 inch, and 10 inch heights with and AMPS base and top. Mounts can be purchased in complete sets or as individual pieces. - Smaller teeth than our super-duty mounts for more adjustment options - 90 degree twist for more angling options
-
This aluminum 6 inch Mount has teeth within the interlocking joints providing a very strong connection that can withstand a lot of weight. It provides a mounting platform that can be used on a variety of vehicles and fixed locations and can be used to - mount a wide variety of products such as tablets, mobile computers, printers, and mobile phones. - The mounts come in 2 inch, 4 inch, 6 inch, 8 inch, and 10 inch heights with and Round AMPS base and top.
-
This aluminum 8 inch Mount has teeth within the interlocking joints providing a very strong connection that can withstand a lot of weight. It provides a mounting platform that can be used on a variety of vehicles and fixed locations and can be used to - mount a wide variety of products such as tablets, mobile computers, printers, and mobile phones. - The mounts come in 2 inch, 4 inch, 6 inch, 8 inch, and 10 inch heights with and Round AMPS base and top.
-
This aluminum 10 inch Mount has teeth within the interlocking joints providing a very strong connection that can withstand a lot of weight. It provides a mounting platform that can be used on a variety of vehicles and fixed locations and can be used to - mount a wide variety of products such as tablets, mobile computers, printers, and mobile phones. - The mounts come in 2 inch, 4 inch, 6 inch, 8 inch, and 10 inch heights with and Round AMPS base and top.
-
Out of stockPEDESTAL MOUNT HD 8 INCH (Rnd Base, Sq Base, Wing Nuts)
-
Out of stockHeavy-Duty Clamp Mount, AMPS, No Arm, 5 x 5.125 Inch Clamp
-
Heavy Duty Swivel Mount - Round Bases, #1 Heavy Duty Pedestal Teeth, #2 Heavy Duty Pedestal Teeth, 4MM Slots (Fits M4 Fasteners)
-
Out of stockHeavy Duty Swivel Mount - Round Bases, #1 Heavy Duty Pedestal Teeth, #2 Heavy Duty Pedestal Teeth, 5MM Slots (Fits M5 Fasteners)
-
Heavy Duty Swivel, #1 Heavy Duty Pedestal Teeth, #2 Heavy Duty Pedestal Teeth, Does not include base plates.
-
Adapts the VC80, VC80x back hole pattern to industry standard AMPS. Threaded for M4 screws. Recessed for flush mounting
-
Out of stockCFLD Shifting Plate for Oracle Micros POS Terminal
-
Out of stockScanner Bracket for Oracle Micros POS - MOQ - 25 Units
-
Out of stockPosition your device higher or lower on the mount. The Vertical Extension Plate attaches to the ProClip Dashboard Mount or directly to a flat surface. Extension plates may not line up with the pre-drilled holes on your ProClip mount. The included self-tapping screws can be used to screw anywhere into the mount face.
-
Out of stockStandard Left/Right Extension Plate. 100 x 50 x 5 mm (3.94 x 1.97 x 0.20 in). Avoid interference with the dashboard controls/displays when using wide devices. To extend your device to the left or right from the Vehicle Mount (especially the ProClip Angled Mount) to avoid interference with the dashboard controls/displays. Extension plates may not line up with the pre-drilled holes on your ProClip mount. The included self-tapping screws can be used to screw anywhere into the mount face.
-
Out of stockThis Pedestal Mount Round Mounting Plate creates an extra sturdy and secure mounting platform that can be used in aircrafts, boats and a variety of vehicles e.g. personal vehicles, commercial vehicles, emergency vehicles, police vehicles, trucks, tractors, fork lifts and RVs. Additionally, the Pedestal Mount Extension Rod can be used with mounts in retail stores, kiosks, gyms, conference rooms, trade shows etc.
-
Out of stockThis 6 inch aluminum Mount has teeth within the interlocking joints providing a very strong connection. It can be used in a variety of vehicles or fixed locations to mount a wide variety of products such as tablets and mobile computers. - These come in 2, 4, 6, 8 and 10 heights with and AMPS base and top and can be purchased in complete sets or as individual pieces. - The design allows you to mix and match the parts to create your own unique design/solution.
-
Out of stockThe VESA ProClip adapter plate attaches to any existing 75mm and 100mm VESA mounting system to create a new flat mounting surface to allow the attachment of ProClip specific mounts and other mounts/devices.
-
This base will give the stability needed to use the mount as part of a free-standing solution. This also for a more portable mount setup which can be easily moved but is still strong and sturdy. - Round base is 200 mm in diameter (7.9 in) - Supports heavy devices
-
Out of stockExtension plate allows a MSR device holder to be added to the ET5X with rugged frame Pre-drilled AMPS hole pattern Made from durable ABS plastic
-
Out of stockThe VESA ProClip adapter plate attaches to any existing 75mm and 100mm VESA mounting system to create a new flat mounting surface to allow the attachment of ProClip specific mounts and other mounts/devices. Attach to 75mm and 100mm existing VESA systems. Made in Sweden from Durable Machined Aluminum. 4 - Pre-drilled 4mm threaded AMPS pattern holes to easily attach ProClip products
-
The VESA ProClip adapter plate attaches to any existing VESA 75mm or 100mm mounting system. Use to create a new recessed mounting surface to allow the attachment of ProClip specific holders. 4 pre-drilled AMPS pattern pilot holes to attach ProClip holders more securely. 5 mm Diameter Holes accommodate up to M5 screws
-
Out of stockThis Extension Plate has pre-drilled holes for the AMPS hole pattern. This allows additional holders to be added to existing mounts. It features up to 5 positions in either portrait or landscape orientation. Additional holes allow for cables to be run through the plate for a clean installation. Extension plate allows an additional device holder to be added. Multiple Locations for AMPS hole pattern mounts. Made from durable steel. 11.8 in (30 cm) x 2.36 in (6 cm) x .12 in (3 mm)
-
Out of stockWhen attaching a ProClip device holder or Mount to a vehicle dashboard or other surface which lacks sufficient structural integrity to provide a stable mounting platform, we recommend the use of of our Reinforcement Plates for added stability and durability. - Simply drill the properly located AMPS hole pattern in your mounting surface, position the plate on the back side of the mounting surface. - Includes: Four M4 screws (20mm thread length) and lock washers
-
Out of stockThis Vibration Damper effectively reduces the shock and vibration transferred to your mobile computing device mounted in particularly demanding environments such as on heavy machinery or forklifts. Simply install the damper (using the included hardeware) between your mobile device holder/cradle and the mounting bracket or Arm that is attached directly to the vehicle or machinery. The machine screws will engage securely with the M4 threaded steel core within the rubber grommets. - Reduce vibration in your mounted device - Supports standard AMPS hole pattern - High density rubber grommets - Maximum supported weight: 1.5 kg (3.31 lbs)
-
Out of stockBLUEBIRD EFR500 Top Support Charging Holder with Cigarette Lighter Plug. This charging holder is a cradle style mount custom made for a perfect fit with your device. It has a dock connector for easy connection of the device to the holder and a coiled power cord with a cigarette lighter plug for connection to a power outlet in the vehicle. The Holder angles 15 degrees for optimal viewing and can swivel 360 degrees.
-
Out of stockTop Support Charging Holder with USB Cigarette Lighter Plug. Custom fit to your Bluebird Pidion EF500R. Includes Tilt-Swivel to allow holder to angle 15 degrees in any direction and portrait and landscape view. Charging cable permanently attached to holder. Coiled cord length is 19 inch / 49 cm. Stretched cord length is 55 inch / 139 cm. Provides up to 10 Watts (2.1A) charging power. Works in 12 / 24 V vehicle power outlets. Power plug converts from 12/24V to 5.4V output. LED illuminated power indicator
-
Out of stockCharging Holder for Hard-Wired Installation. Custom Fit For: CipherLab CP60. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view
-
Out of stockThis Holder is made to fit the Microsoft Surface Pro 3 tablet without a case. It is a high quality custom made holder with a neat and discreet design. Easily snap your device in and out of the holder.
-
Out of stockSurface Pro 3 Key Lock Holder for UAG case. Custom Fit For: Microsoft Surface Pro 3. Custom fit to your device with UAG case. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Combine with a ProClip vehicle mount for a full mounting solution. ONLY for Surface Pro 3 with UAG Scout or UAG Rogue case. All holders are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone.
-
Out of stockCustom fit for Microsoft Surface Go and Surface Go 2 bare device. Built in clip to hold the Surface Pen. Key lock for security of tablet.
